--- product_id: 136478266 title: "Weigand Ruger Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount" brand: "weigand" price: "VT21263" currency: VUV in_stock: true reviews_count: 5 category: "Sports" url: https://www.desertcart.vu/products/136478266-weigand-ruger-mark-i-ii-iii-iv-and-22-45 store_origin: VU region: Vanuatu --- # Weigand Ruger Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount **Brand:** weigand **Price:** VT21263 **Availability:** ✅ In Stock ## Quick Answers - **What is this?** Weigand Ruger Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount by weigand - **How much does it cost?** VT21263 with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.vu](https://www.desertcart.vu/products/136478266-weigand-ruger-mark-i-ii-iii-iv-and-22-45) ## Best For - weigand enthusiasts ## Why This Product - Trusted weigand brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Full description not available ## Images ![Weigand Ruger Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount - Image 1](https://m.media-amazon.com/images/I/31kxwUrwkKL.jpg) ![Weigand Ruger Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount - Image 2](https://m.media-amazon.com/images/I/21dkaq2tz5L._SL500_.jpg) ## Available Options This product comes in different **Color** options. ## Customer Reviews ### ⭐ Terrible fit. LOOK FOR SOMETHING ELSE. *by B***. on Reviewed in the United States on February 16, 2019* I read others' review of this item claiming they needed to file down the rail in order for it to fit on their gun. I thought maybe they just received a lemon and I went ahead and purchased this item. I was wrong the filing I needed to do to get the rail over the dovetail insert took several hours because I didn't have the correct size file to fit the inside of the rail to remove enough material to allow it to slip over the dovetail. I finally took a drill bit large enough to fit inside the groove and attached it to my drill so I could gouge out the opening. It wasn't pretty when I finished, but no one can see it with the rail over the dovetail. The manufacturer of this item could easily make the opening wider at the time the rail is made at the factory so the rail fits over the dovetail insert without having do any filing by the Buyer after the purchase. There is no reason the manufacturer can't make the adjustment to their milling machines to make this simple adjustment. They would have happier customers and a higher rating. Would I recommend this item? Only if I didn't like them and wanted them to be frustrated for a few hours like I was. Look for something else to buy unless you have a lot of time, patience and a set of metal files and a vice at home to perform the necessary extra work you will need to remove the excess material before you can mount this rail to your gun. ### ⭐⭐⭐ Warning! Extremely Difficult To Install! *by P***E on Reviewed in the United States on November 20, 2019* I followed the included instructions and the online video very carefully. The night before, I sprayed the original sight with PB Blaster and let it "soak in". That did not help.Don't even think about trying this unless you have a very large vise mounted on a very heavy workbench, the proper hammer, and a very substantial punch. I used a 1/4" X 3" bolt as a punch -- after making sure the end was perfectly smooth. The suggested brass punch rod would not have been adequate. I started off using index cards as cushioning material as suggested in the online video. No matter how tight I clamped the barrel, it would rotate when the sight was pounded on -- the sight might just as well have been welded to the barrel.Using rubber tool drawer lining for cushioning worked a little better, but the piece still rotated. We're talking about some serious hammering here. Of course, if you keep on clamping the vise tighter, you are going to distort and destroy the barrel of the gun, and how are you to know exactly how much clamping force that part is going to take without bending?I finally solved the rotation problem by fitting a very large nail (more of a spike) through the pin hole at the back that secures the barrel to the frame. By bracing this spike with yet another hunk of metal, I was able to stop the rotation in the vise. Pounding with all my might, I drifted the sight out about halfway. When it refused to go any further, I reversed the direction of pounding to try and drive it the other side. This finally worked after a tremendous amount of effort, while having to reposition the piece about thirty times.Following the packaged instructions, I degreased everything. This was a mistake. Despite much filing, the mounting block refused to go into the dovetail, and it took more filing than "breaking the edge" (from the instructions) on the mounting block. I tried to drive it in from the other side, which failed. I didn't want to file too much off, as an extra thousandth of an inch might have caused it to be too loose (if that had happened, the entire shebang would have been ruined). I did NOT want to try and put the original sight back on the gun.I tried putting a drop of oil on the part. The oil lubricated it enough that I was able to drive it in with high effort. If the instructions had mentioned the possibilty that degreasing would cause this problem, and suggested a drop of oil, it would have gone much, much more smoothly. Nevertheless, oil would not have helped to remove the original sight.Anyone who says this is easy does not have my gun. It took three hours to get it in, with a lot of deliberation about the best way to proceed, a lot of repositioning, and a hell of a lot of pounding (with the same sized hammer they used in the video).Also, it's expensive, and it adds a little more weight to the gun than you might anticipate. I didn't check the price of having a gunsmith drill mounting holes, but I wish I had.On the plus side, the mount itself (the part you can see - not the mounting block) is very well made. It looks like it is an original part of the gun. Unless it falls off, it will be on there forever, because there is no way I would ever, ever try to restore the gun back to the way it was. ### ⭐⭐⭐⭐ Great rail, no gunsmithing *by J***. on Reviewed in the United States on May 4, 2016* Tough getting old sight off but once i got it off this went on very easily just a bit of filing on the provided dovetail base for fitting and the rest was easy, 4 screws and done. Love it. --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.vu/products/136478266-weigand-ruger-mark-i-ii-iii-iv-and-22-45](https://www.desertcart.vu/products/136478266-weigand-ruger-mark-i-ii-iii-iv-and-22-45) --- *Product available on Desertcart Vanuatu* *Store origin: VU* *Last updated: 2026-05-16*