Happybuy 14 inches Yellow Lawn Mower Blade Sharpener Grinder Motor NOT Included Garden Blade Sharpener Adjustable Ring Rust 30°Angle

sharpens blades at a great angle and sharpness for easy, quick and effective moving

The supplier should have supplied two worm clamps to securely hold the grinder in place. I had to figure out how to add additional clamping to hold the grinder in a fixed position during actual grinding operation. The single clamp supplied with the kit did not hold the grinder sufficiently.

Could not work with the product. Not easy to use

Where should I start! This is a Cheaper Knock Off Version of the Yellow Jacket blade sharpener. Know and Understand that as u look into buying it.Does it work, yes and no. In my eyes the blade rest is to far away from the place where the sanding disc will be but then again I am comparing it to the original design. I redrilled the mounting holes for the blade table and moved it closer to where the blade and disc touch.I also drilled and mounted a grinder stop so that when the grinder is placed into position I can keep the grinder at a “set” position.To be Honest and Completely Fair, I knew this was going to be a knock off of the more expensive original and I went in knowing not to set my standards to high. With that in mind, I wasn’t disappointed.As it arrives it is usable but I took it upon myself to further modify it. This only works for people with the know how and ability to do such design modifications. For that I will give it a 5 star review.For anyone Without the ability to know, understand, and modify a piece of equipment safely then I suggest you look at the original for its better built design.I would suggest it to anyone but to a DIY type person just know you will need to redesign it to get the best out of it. (I also attached a handle to it to make it a quick Grab-n-Go item)

Very sturdy and very easy to use. Won't work on mulch blade's due to curve in blade's

who ever made this jig did not pay attention in math class to get a 30 degree angle on the cutting surface with the grinder at 90 degree the blade rest needs to be at a 60 degree angle. as seen in the picture the blade rest is at 52 degree, which is close. This will give you a blade angle of 38 degree a lot of metal to remove from the blade. I modified mine to grind closer to 30 degree

This is great just what I was looking for I sharpen my blades and I went to cut very tall grass and it cut like a knife through butter

The 30 degree cutting angle relative to a perpendicular cutting disc is insufficient. This appears to be an engineering flaw for the specific device that I received. I'm not taking a chance on an exchange unit. Returning this unit & purchasing the original Yellow Hornet instead. If the manufacturer of this device engineers the correct bar angle , this would be a nice tool.