--- product_id: 158706907 title: "Climax Metal 2C-137-Z Two-Piece Clamping Collar, Zinc Plating, Steel, 1-3/8\" Bore, 2-1/4\" OD, 9/16\" Width (Тwo Рack)" brand: "climax metals" price: "VT19336" currency: VUV in_stock: false reviews_count: 8 category: "Hi" url: https://www.desertcart.vu/products/158706907-climax-metal-2c-137-z-two-piece-clamping-collar-zinc store_origin: VU region: Vanuatu --- # Climax Metal 2C-137-Z Two-Piece Clamping Collar, Zinc Plating, Steel, 1-3/8" Bore, 2-1/4" OD, 9/16" Width (Тwo Рack) **Brand:** climax metals **Price:** VT19336 **Availability:** ❌ Out of Stock ## Quick Answers - **What is this?** Climax Metal 2C-137-Z Two-Piece Clamping Collar, Zinc Plating, Steel, 1-3/8" Bore, 2-1/4" OD, 9/16" Width (Тwo Рack) by climax metals - **How much does it cost?** VT19336 with free shipping - **Is it available?** Currently out of stock - **Where can I buy it?** [www.desertcart.vu](https://www.desertcart.vu/products/158706907-climax-metal-2c-137-z-two-piece-clamping-collar-zinc) ## Best For - climax metals enthusiasts ## Why This Product - Trusted climax metals brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Size:Тwo Рack This Climax Metal two-piece clamping shaft collar is made of zinc-plated steel. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece design separates into two halves, allowing installation or repositioning anywhere on the shaft without disturbing existing components. It accommodates a greater variety of shaft diameters than setscrew collars and is effective on both hard and soft shafts. It is made of steel for weldability and rust resistance and is zinc plated for better resistance to corrosion than black oxide steel. This collar comes with socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -17 to 121 degrees C (0 to 250 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others. Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft ## Features - Two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars - Effective on both hard and soft shafts - Steel for weldability and rust resistance with zinc plating for better resistance to corrosion than black oxide steel - Includes socket-head cap screws for securing the collar onto the shaft - ›See more product details ## Images ![Climax Metal 2C-137-Z Two-Piece Clamping Collar, Zinc Plating, Steel, 1-3/8" Bore, 2-1/4" OD, 9/16" Width (Тwo Рack) - Image 1](https://images-na.ssl-images-amazon.com/images/I/41Wu-YvXkPL.jpg) ## Customer Reviews ### ⭐⭐⭐⭐⭐ Great ball stretcher *by A***1 on May 15, 2019* Purchased two to use as a less expensive ball stretcher. They are much larger and heavier than I expected. I thought the inner diameter would end up being too big but it actually works damn near perfect. The edges are smooth and there isn't any scratching and only slight pinching when tightening if you aren't careful.I had an elastic one but since it was stretchy when my balls would try to pull up a testicle would slip through it, that is not the case with this. ### ⭐⭐⭐⭐⭐ Fantastic for what I bought them for! *by S***C on October 22, 2018* I bought 2 of these as ball weights for my submissive. They work wonderful and I do recommend these to everyone I know. ### ⭐ Not for a quick romp, not for stretching....what's this actually for? *by S***R on July 17, 2019* Well, after finally managing to get the wrench (NOT included, but luckily I have a new set of Allen wrenches)... into the ring's incredibly tight screw, I tediously managed to get both sides securely tightened down. (Be prepared to navigate this process tediously, so as to avoid being pinched. It took me well over 5 minutes...maybe a bit lot longer, actually. I have used many Allen-screw-based rings, purchased from sex shops in years past, so I am VERY familiar with the dynamic and how to avoid being pinched, etc.....This product just seemed to WANT to pinch! The flat-sided ring has VERY sharp 90* angled-edges...especially on the inside...and although I finally got it in place without being pinched seriously or getting cut, once it was on it still felt as though I had something sharp hanging from me and if I were to ever put cargo shorts or pants on, getting pinched simply from the sharp edges and sharp corners would be quite easy to do. Sex with this thing on was not going to EVER be considered as an option. It's my fault for assuming this thing was bigger, and heavier. Stretching wasn't even close to happening, and it was so light that I really couldn't feel any downward tug from its weight. I did wear the thing under some soft gym shorts all evening while hanging out at my place, just to give it a shot, but considering all that I've just described, I didn't dare wear it to bed, come sleepytime... Considering I had to initially tear the plastic, logo-emblazoned, sealed factory packaging open....and considering the ring was hanging from the twins all evening...and considering it only cost me $6.90....it's just not worth the time and trouble for me to bother returning it. Maybe I'll need this for a plumbing project one day....which is what I'm thinking this is actually what these rings were made for. (Or, they WERE designed for manly parts...by a sadistic lesbian who has no clue what it's like to have external equipment.). My advice? Move on to another product, spend a bit more money and get something with rounded edges, a little wider/heavier...something that's worth the trouble of doing the Allen wrench thing. (Which I personally prefer, actually.)When will I ever freaking LEARN that YOU GET WHAT YOU PAY FOR? --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.vu/products/158706907-climax-metal-2c-137-z-two-piece-clamping-collar-zinc](https://www.desertcart.vu/products/158706907-climax-metal-2c-137-z-two-piece-clamping-collar-zinc) --- *Product available on Desertcart Vanuatu* *Store origin: VU* *Last updated: 2026-05-06*