Victron Energy Smart BatteryProtect 12/24-Volt 100 amp (Bluetooth)

Works great, Love. I can monitor with BlueTooth, adjustable voltage settings are very acturate. I use this on my Mach E, EV to control my added Bluetti Charger and Bluetti Battery Back for my EV 120v outlet for heaters and acc plus camping.

The cheapest best quality and easiest to install battery protect on the market

Simple install and setup with a plethora of customizable options. Power capabilities are higher than most products on the market. I used it to act as a bluetooth power shutoff for an alternator charger to my truck for a Bluetti power station. Convenient on/off switch, and great for battery protection. Can easily customize the voltage range to automatically turn off the circuit when the batter drops below a certain voltage and turn on again when the voltage goes back up within the range. Very versatile product with endless applications.

It is useful and I don't need to worry about the aux battery health

Shipping and seller is normal (ie no problems whatso ever) but the victron product itself is VERY sensitive to surges. Install was on a 2023 can am x3 with a 2 battery system, victron shunt, and bluesea ACR. This product was set up in between a agm battery and 2 outputs of LED lights and a speaker bar. Found a short on the body after the product working flawlessly and whamo locked into open circuit and wouldn't even turn on. tried soft/hard restart, changing neg, resecuring grounds, etc to no avail. Worked for 24 hours and dead after a surge.... victron shunt and battery sense also connected received NO damage or changes in their function. Completely unusable and switched for a resettable breaker... I accept my fault but.... everything else survived?

Used this for a low voltage protection in a Power Wheel with Dewalt 20V batteries. Had trouble with the delay that it takes to turn on. When pressing the pedal, this thing detects the load then takes 6 seconds to turn it on. I got around that by just wiring in a small LED light that is always on. Then the load is always on, and the pedal response is instant. Blue tooth range could be better, but overall it works for me

Being able to customize the turn off (and turn back on) voltages down to the decimal (and even 0.01 increments) was critical for my power setup in my SUV camper. I have a Dakota Lithium starter battery for my car's main battery, which has about 1600 Wh of power and recharges directly from the car's alternator. I also use that starting battery to charge my Ecoflow Delta 2 (which only has 1000 Wh). Since my starter battery charges at about 60 Ah via the alternator, it made a lot of sense to trickle charge the Delta 2 from the car battery (with this smart battery protect to turn off the charging before the car battery got too low). I have the Delta 2 charge through an XT60i cable connected to the output of the BatteryProtect (so it charges at 12V 15A, a.k.a. about 180W). This also means it's all DC-to-DC, rather than trying to charge via an AC inverter (which would be DC-to-AC-to-DC). I was able to set the BatteryProtect to turn off at around 12.60V (about 40% of starter battery remaining), and have it not turn back on until it reaches about 13.30V. Different off vs on values were critical, since when the Ecoflow is charging at 180W, the voltage dips by about 0.65V. I've been on a 3-week car-camping trip and this setup has been working flawlessly!

Using Bluetooth the settings are very fine and ultatuneable. You can disable Bluetooth and there are some presets you can use. You might decide to disable Bluetooth for power savings of disabiling the radio. Great product for it's purpose. How to improve: Make Bluetooth mandatory. Have a sliding switch to turn Bluetooth on or off as you then can forget about the manual segment interface. No reason not to require Bluetooth. Having a simple switch let's you turn it off when you don't need it or leave it on as you wish. Much easier. Additionally I don't understand why they don't have a complementary max voltage shutoff. I imagine there may be some edge cases where people might find that usefull and it's easily implementable in firmware in the existing hardware.

Ottimo prodotto lo consiglio

Cumple con lo que se describe, además de poder agregar la configuración manualmente si no desear usar las que trae por defecto, esto para poder cuidar aún mas tu batería se agradece y hasta el momento me ha funcionado de maravilla. Muy recomendado.

Prima

Good

Kreeg de gewone versie en geen Smart Bluetooth. Ik heb dit twee keer besteld en twee keer de gewone versie ontvangen.