--- product_id: 202982567 title: "HWA KUNG PEI Sheet 11.8\" x 11.8\"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive,Amber" brand: "hwa kung" price: "VT128" currency: VUV in_stock: false reviews_count: 16 category: "Industrial" url: https://www.desertcart.vu/products/202982567-hwa-kung-pei-sheet-11-8-x-11-8-300x300mm store_origin: VU region: Vanuatu --- # HWA KUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive,Amber **Brand:** hwa kung **Price:** VT128 **Availability:** ❌ Out of Stock ## Quick Answers - **What is this?** HWA KUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive,Amber by hwa kung - **How much does it cost?** VT128 with free shipping - **Is it available?** Currently out of stock - **Where can I buy it?** [www.desertcart.vu](https://www.desertcart.vu/products/202982567-hwa-kung-pei-sheet-11-8-x-11-8-300x300mm) ## Best For - hwa kung enthusiasts ## Why This Product - Trusted hwa kung brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Parameter: Size: 300mm x 300mm (11.8" x 11.8") Thickness: 0.3mm Colour: amber Material: PEI Adhesive material: 3M 468MP Installation: Cut the PEI sheet to size by scoring with a hobby knife（This PEI hot bed sticker measures 300mm x 300mm）. Remove the protective film from the PEI sheet. Apply the PEI with slight pressure and at an angle to prevent and minimize air bubbles.Once applied set the print bed to 60C and apply pressure evenly across the PEI in a sweeping fashion to firmly set the adhesive. Please use a towel to avoid getting burned. Level the bed and set the height of the nozzle before printing and you are ready to go! Instructions for use: Heat the bed to the desired temperatures for printing (60 C for PLA and 100 C for ABS). Depending on how thick your bed sandwich is, your set temperature may not be your surface PEI temperature. When the print is completed, let the bed cool, and the part will be easy to release from the PEI surface. Parts are actually easier to remove if released before the bed becomes completely cold. Leveling the bed is very, very important when using PEI. You want the first layer to be close enough to be squished a little. PETG is an exception and doesn't like squished layers, in which case a Z gap should be used. Maintenance method: Clean in between prints with isopropyl alcohol and a lint free rag. Acetone can be used instead of isopropyl alcohol, but the bed must be cold if acetone is used. Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life. Packing list: 1pcs x PEI Sheet Hot Bed Sticker (300mm x 300mm ) ## Features - This kind of PEI sheet is 3M 468MP tape pre-applied, which means you have no need to apply the 3M tape on the sheet anymore, and no slurry, or adhesive.It is especially convenient to use. - ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down. - Compared with other ordinary hot bed stickers, PEI sheet hot bed stickers are more resistant to high temperatures, more durable, and are not easily scratched.The bottom of the model printed on the PEI sheet is smoother and the model is easier to take out. - Easily clear the PEI sheet surface with a quick wide done with isopropyl alcohol, methyl alcohol, or soap for next use.Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life. - Suitable material: ABS, PLA, PVC, NYLON, PCL, TPU, TPE, etc. ## Images ![HWA KUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive,Amber - Image 1](https://images-na.ssl-images-amazon.com/images/I/51ym5DKwYUL.jpg) ![HWA KUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive,Amber - Image 2](https://images-na.ssl-images-amazon.com/images/I/51OXrTurgcL.jpg) ![HWA KUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive,Amber - Image 3](https://images-na.ssl-images-amazon.com/images/I/61R4LMBbhQL.jpg) ![HWA KUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive,Amber - Image 4](https://images-na.ssl-images-amazon.com/images/I/41iMA8pqvBL.jpg) ![HWA KUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive,Amber - Image 5](https://images-na.ssl-images-amazon.com/images/I/51uixiSa4mL.jpg) ## Customer Reviews ### ⭐⭐⭐⭐⭐ BE CAREFUL WHEN INSTALLING *by A***R on Reviewed in the United States on March 6, 2019* I had to buy two of these. The glue on the back is remarkably strong and heat resistant. If you're not careful getting all the bubbles out while you're installing the sheet you're definitely not getting them out later. That said this stuff works great, I stuck it to a piece of borosilicate so when I print PLA I can flip it to the PLA side and when I print nylon or PETG I flip it to the glass side. The glue doesn't run even at high temperatures and the sheet hasn't shifted at all. Good buy, would highly recommend. ### ⭐⭐⭐ Most important upgrade/accessory for your 3d printer *by J***N on Reviewed in the United Kingdom on December 1, 2019* Installed fine and flat. Went to print and a top layer started to melt.It was the protective layer on top I didn't know about lol.After removing that, setting my new z height, the print seem to stick really really well.spoke to soon. After about 8 layers it's warping!!Just have to raise temp to see but not as good as I was expecting.Using on pla so. Haven't tried petg as I had trouble getting that to stick on other surfaces. Will try petg next as I've heard it stick just as well ### ⭐ Not fit for purpose *by T***R on Reviewed in the United Kingdom on January 2, 2020* Bought this to improve adhesion on our Creality CR-20. After applying the PEI sheet to the build surface and making sure the protective film was removed, we could no longer get any adhesion what so ever on the build surface. All prints failed. We tried cleaning the surface with the recommended cleaners, increasing the temperature all to no avail. The product does not work and is not fit for purpose. Avoid! --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.vu/products/202982567-hwa-kung-pei-sheet-11-8-x-11-8-300x300mm](https://www.desertcart.vu/products/202982567-hwa-kung-pei-sheet-11-8-x-11-8-300x300mm) --- *Product available on Desertcart Vanuatu* *Store origin: VU* *Last updated: 2026-05-06*