---
product_id: 21709731
title: "12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type"
brand: "dernord"
price: "VT11948"
currency: VUV
in_stock: true
reviews_count: 13
category: "Dernord"
url: https://www.desertcart.vu/products/21709731-12v-600w-immersion-heater-submersible-water-heater-element-stainless-steel
store_origin: VU
region: Vanuatu
---

# 600W high power output 12V DC compatible with batteries & solar 1" NPSM flange fits standard tanks 12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type

**Brand:** dernord
**Price:** VT11948
**Availability:** ✅ In Stock

## Summary

> 🔥 Heat your water, power your lifestyle – anytime, anywhere!

## Quick Answers

- **What is this?** 12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type by dernord
- **How much does it cost?** VT11948 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.vu](https://www.desertcart.vu/products/21709731-12v-600w-immersion-heater-submersible-water-heater-element-stainless-steel)

## Best For

- dernord enthusiasts

## Why This Product

- Trusted dernord brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Built to Last:** Durable stainless steel with electropolished finish resists corrosion and wear.
- • **Universal Fit:** 1-inch NPSM flange ensures easy installation on standard or custom water tanks.
- • **Power Up Anywhere:** 600W heating element delivers rapid warmth, perfect for off-grid setups.
- • **Leakproof Confidence:** Includes flexible silicon sealing washer for a waterproof, worry-free seal.
- • **Plug & Play Compatibility:** Runs seamlessly on 12V DC from batteries, solar panels, or wind turbines.

## Overview

The DERNORD 12V 600W Immersion Heater is a robust stainless steel submersible heating element designed for 12V DC power sources like batteries and solar setups. Featuring a standard 1-inch NPSM flange for easy installation, it delivers fast heating with 600 watts of power and includes a silicon sealing washer for a secure, waterproof fit. UL and cUL safety listed, it’s engineered for durability and off-grid convenience.

## Description

DERNORD 12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type - desertcart.com

Review: Solid. Good looking element. - Have not installed yet, but the product appears well made. Updates later.
Review: 12 V water heater - this unit works like a charm. with solar charged battery power this immersion water heater brings water up to 120° F in about half an hour in a seven gallon bucket. left on it climbs to 160° F . easy

## Features

- 12v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1" NPSM flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof

## Technical Specifications

| Specification | Value |
|---------------|-------|
| ASIN | B0182BETBE |
| Best Sellers Rank | #96,694 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #168 in Water Heater Replacement Parts |
| Brand Name | DERNORD |
| Color | White |
| Customer Reviews | 4.2 4.2 out of 5 stars (139) |
| Item Length | 185 Millimeters |
| Item Weight | 10.95 Ounces |
| Manufacturer | DERNORD |
| Material Type | Stainless Steel |
| Model Number | DERNORD-37 |
| Part Number | DERNORD-37 |
| UPC | 717080640315 |
| Unit Count | 1.0 Count |
| Voltage | 12 Volts |
| Wattage | 600 watts |

## Product Details

- **Brand:** DERNORD
- **Color:** White
- **Item Length:** 185 Millimeters
- **Material:** Stainless Steel
- **Voltage:** 12 Volts

## Images

![12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type - Image 1](https://m.media-amazon.com/images/I/612zVtqjzuL.jpg)
![12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type - Image 2](https://m.media-amazon.com/images/I/61gqFZxUOYL.jpg)
![12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type - Image 3](https://m.media-amazon.com/images/I/61QcsU-W4CL.jpg)
![12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type - Image 4](https://m.media-amazon.com/images/I/61umBVXk9AL.jpg)
![12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type - Image 5](https://m.media-amazon.com/images/I/61MeyfW8ORL.jpg)

## Available Options

This product comes in different **Size** options.

## Questions & Answers

**Q: I have a 100 gallon preheat tank plumbed ahead of my regular water heater. can I install this powered by 600 watt of solar panels. will it overheat**
A: I would not advise directly connecting this to solar panels as there are no regulars for the amount of power that enters the heating element. Solar panels are rated to a specific wattage in the best environment possible, but they will likely never achieve the written specifications on the panel/manual. Take note that in a typical 12V solar panel the output voltage typically ranges from 16V-18V, this is be cause you would need higher than 12V to charge a 12V battery and it is expected that the solar panels will not always get full sun. I believe best practice would be to get a charge controller and a small battery bank for your setup. You can get a decent charge controller for this setup for around $20-30 on Amazon. Batteries will vary, if you go with deep cycle make sure you have ventilation as they excrete flammable hydrogen gas, make sure you keep them filled with distilled water and have a cut off switch so they do not run under 40% charge. Running deep cycle batteries lose a lot of life if they are drained below 40% charge. You can also get lithium batteries that can be run all the way down to 0% without any difference in degeneration; however, with lithium batteries degeneration is occurs every time charging is initiated. With a solar panel and a charge controller you'll be constantly charging and discharging the battery. Good luck with your setup, sorry if this response inquires more questions than it provides answers.

**Q: Can u run just one part of element for low demand and kick on the second part for higher demand**
A: Of course you can, but please take down both metal plate.

**Q: What the correct size of then ? Length and Width?**
A: Please make sure your voltage and wattage(12V, 600W), and then take into account the length (Tube length to the terminal flange:180mm) and flange(1" NPSM).

**Q: Hi, Can we run from 240v to 12v dc transformer directly?**
A: Hi, 12v heating element is ok!

## Customer Reviews

### ⭐⭐⭐⭐⭐ Solid. Good looking element.
*by Z***O on July 29, 2019*

Have not installed yet, but the product appears well made. Updates later.

### ⭐⭐⭐⭐⭐ 12 V water heater
*by J***E on July 19, 2016*

this unit works like a charm. with solar charged battery power this immersion water heater brings water up to 120° F in about half an hour in a seven gallon bucket. left on it climbs to 160° F . easy

### ⭐ Don’t buy it
*by W***S on July 14, 2022*

I was excited to use this. However it does not work at all. Unboxed it and the inner coil is rusted like it’s been used and returned. Figured it may had been a defect. When using the item and it makes a sizzling noise, thought that it was warming up in the water. I checked it 30 minutes later and the water was still as cold as when it came out of the faucet. The coil was cold as was the device. Returning as it was a definite waste of money.I was excited to use this. However it does not work at all. Unboxed it and the inner coil is rusted like it’s been used and returned. Figured it may had been a defect. When using the item and it makes a sizzling noise, thought that it was warming up in the water. I checked it 30 minutes later and the water was still as cold as when it came out of the faucet. The coil was cold as was the device. Returning as it was a definite waste of money.

## Frequently Bought Together

- DERNORD 12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPSM Fitting Double U Type
- bayite DC 12V Fahrenheit Digital Temperature Controller 10A 1 Relay with NTC 10K Sensor
- bayite BYT-7A006 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.vu/products/21709731-12v-600w-immersion-heater-submersible-water-heater-element-stainless-steel](https://www.desertcart.vu/products/21709731-12v-600w-immersion-heater-submersible-water-heater-element-stainless-steel)

---

*Product available on Desertcart Vanuatu*
*Store origin: VU*
*Last updated: 2026-05-12*