KrylonK07020007 10.25-Ounce Easy Tack Repositionable Adhesive Spray

Good product

I use this spray to restick my Cricut mats. I've heard mixed comments before and thought I'd try it. I'm here to say, it works great. I did not gum up my Cricut as some have said. And it worked far better than other brands I've tried which were too sticky so the paper couldn't be peeled away. This does just what it says, it allows you to stick and peel away and reposition - exactly what you need for my application. The only drawback is spraying a glue in my home...I don't want it all over, so I've taken to using a large cardboard box as a "spray booth" to avoid mess. Hope this helps someone out there.

This is the best stuff I think I have ever purchased. I am stenciling a slanted, highly textured ceiling with a huge stencil that is hard to handle and get stuck to the ceiling. Once I learned to put the can’s nozzle about 4 inches from the stencil and ensure to spray every spot AND spray it every single time I apply the stencil to the wall, the stencil sticks to the ceiling like magic. Even with the high texture of the ceiling, bleeds are rare. The difference between the areas I stenciled before I discovered this stuff and after are astonishing. I am going to repaint the areas where I did not use the Easy Tack and redo the stenciling with it. I can’t describe how wonderful this stuff is for stenciling.I used 1 can for every 24 square feet and took me 7 cans to finish the project, but worth every penny!

The product works well (just don't over spray your stencil or it'sa- impossible to get off andb- leaves a residue that won't come offBut if you spray your stencil lightly, the product works well.That said, the cap was next to impossible to get off. The directions say, pinch and pull. I pinched and pulled, my teenage daughter tried to to, we both tried at the same time. In the end, we pulled out a wrench to pinch it tight enough to pull it off. Needless to say, we can't store it with the cap on if we plan to get it off again!

I used this stuff for two purposes, and it worked great in both. First, I am creating 36" x 24" posters from photos printed using an online service. I use el-cheapo poster frames that have a cardboard backing for the poster and a clear sheet atop. I've been able to apply the poster, then two weeks later come back, and resmoothed the poster where it has not stayed flat. Lifts off and easily goes back on. It ends up being perfect. So for something like $30 frame and picture I have a huge poster that looks great.2nd usage was with very small photos I had cut up to make a collage on foam board. Been on my wall for weeks and is holding up great.Warning - this is a chemical with all kinds of chemical warnings on it - flammable and explosive. You do not want to let a kid use this unsupervised, and you want to take all precautions yourself. Definitely spray it outside.But it works... works... works... beautifully. I have made 5 large posters so far.

We've used other spray adhesives over the years, some big brand names. I was surprised that there would be a noticeable difference in the spray evenness and consistency, i.e. no splattering, the spray does not blast out of the can on the first push of the button and dribble when you complete your sweep. Nice.My application: I had several projects all framing posters, photos, light objects in picture frames, shadow boxes, and non-picture glass. I had 15 frames to do, I sprayed them all at once one one side and proceeded to position each item on it's backboard one at a time. I repositioned as necessary to get a better visual effect or balance more pleasing to the eye.(not everything looks best centered). Two photos I needed a very secure bond, so I sprayed both surfaces, waited a few minutes for both to get tacky, pressed together - not really repositionable but a very secure and firm bondthat I know is not going to wrinkle over time.

Not even what I bought it for but I found a GREAT use for this. Do you have a suction cup mount for your cell phone or GPS that will not stay stuck to the window? Well do I have a suggestion for you! Clean the cup and windshield then with a little paper, protect the mount and spray the face with a liberal amount of glue. Let it dry, I let mine dry overnight, then attach it to the windshield where you want it. It will hold and hold and hold. You can remove it later with a little effort.It also worked for what I bought it for. I spray a lite coat on the deck and attach the Tee shirt to hold it for screen printing. Works quite well. As with any glue, be careful of over spray.

I have mixed feelings about this product. I purchased it based on several other reviewers using it for wood lettering in a baby's nursery. I have a very delicate wood sign for my cake business that I wanted to attach to the wall but the individual letters are too skinny even for finishing nails. I liked the idea of not damaging the walls, too, so I bought it. It does indeed get tacky and stick to the wall. And it looked AWESOME. However, by the next morning, several of the pieces had fallen down. I figured it was user error, so I redid the process again and put them back on the wall. Since March when I used this product, I've probably had to re-attach almost every letter in the cake sign at some point- sometimes 2 or 3 times. So I am a little disappointed - I knew it would be repositionable and thus easier to remove, but I also thought it would actually stick until I tried to remove it. Even now as I type this, one of the letters is hanging off the wall about to fall.