UHAPEER 50Pcs Tile Leveler System with Special Wrench, Reusable Tile Leveler Kits for Building Floors Walls

Great for levelling the tiles, very easy to use.Only problem I had was that I was using white porcelain with a very thin glaze on it, when reusing it, if there was even a tiny amount of adhesive on the edge of the tile, or on the leveler then it scratched up the front of the tile, leaving it a different colour, more user error than anything rather than a product fault.

I have a property maintenance business and I used the tile leveler to do a tiled floor. They worked brilliantly. I liked how they levelled the floor with ease and that they are re-usable. They took a few minutes to get used too. Having to remember to turn the black part first when un-doing them and holding the orange part. The metal tee part can bend if you try un-doing the orange part first but can be easily straightened with a pair of pliers. Made my work look very professional. I'm very pleased with this product.

Works well, super cheap. Only niggle is that I didn’t get the little tightening wrench with mine, but to be honest they’re relatively easy to hand tighten.

I’ve given the product a 3 star review as they are not quite as reusable as I would like, I bought 2 packs to help lay over 25sq mtr of external porcelain tiles, I have nearly finished and say I’ve lost close to one pack already with plastic snapping off or the metal part snapping, they do work well and leave a level tile, but it’s an expensive tile spacer

Great product, really happy with result of tiling using these. The fact they are reusable is a bonus. However be prepared for a few to break, out of 100 I bought about 10 broke, this is no fault of the product, just the adhesive drying and being unable to remove them. But it's ok cause it snaps below tile line. Overall very good will continue to use and will purchase more when needed.

First time I have used this system but it was so easy to use I am tiling a wet room and with the amount of cuts going to the drain it was much easier to lay the tiles and then adjust them and I left the floor overnight and removed the fixings very easy just a twist and they were out

It would be better if the metal ‘T’ bar was nearer the orange screw thread, as I needed to pack-out the nuts for the thickness of tiles I have used which were around 10mm. The nut came to the end of the orange screw thread as the tiles aligned, if the tiles had been thinner, these would not have worked without thick packing.

Easy to use & better than x spacers