Fortin EVO-ONE-MAZ3 Remote Start Combo for Select 2013-up Mazda Vehicles

I installed this in my 2017 Mazda CX-9 Signature and I'm very happy with it. I purchased the Flashlink adapter and RM912 long range remotes for this system as well. The hardest part was programming the long range remotes. I had to search the FAQs on Fortin's website to figure out that the bypass plug (white connector next to the main 6 pin connector) needs to be unplugged while programming the remotes. Once programmed, I was able to plug this connector back in. Now the remotes operate as they should. This should have been explained in the instructions but, no big deal. Very happy overall. Will be installing in all of my vehicles.

There are no instructions provided with the unit and you must have a Flashlink Updater. There is a specific version listed in the item description but I bought one listed as Flashlink 4 (newest version) and it worked fine. In the updater software you can pull up fairly useless videos and also a more useful PDF with install instructions. In my case I found much better instructions on a forum before placing the order. Installation took about 20 minutes.There are potentially an intimidating number of wires on the harness but all that was required was using the plugs. There are programmer settings that don't necessarily work on all cars as the EVO-ONE unit works with a wide range of vehicles. For instance there is an option to turn on heated seats in cold weather, but that is not wired into the plugs used by the harness for my car so it does not work. You can sort out your own wiring to bridge from the harness to the wiring for the heated seats but I don't intend on doing that.Since install the system has worked flawlessly. The heating system comes on where it's left so adjust it to what you think you want the next time you start the vehicle.

Followed a youtube video (there is no oficial instalation video) step by step but in the last step (reconecting the Fortin EVO-ONE-MAZ3 to my laptop to decode the key) it didnt work at all and in fact my computer never reconized again the Fortin EVO-ONE-MAZ3 ... almost $300 to trash??? need support guys

Bought this for my 2016 CX5 and it was an easy install in my opinion. As long as you have some base knowledge with cars and electronics you should be able to knock this out in an hour or two. I've had this for about a year now and it's still going strong.Id recommend the FortinOne over the FortinAll just to be able to transition easily from remote start to driving. Make sure you get the Flashlink adapter to be able to hook to the PC to get everything programmed.

I ordered one for a Mazda cx-5. It came with a custom plug and play harness. The tricky part was the programming which requires the flash device from Fortin. I had to go thru all the programming twice before it actually worked. But it’s been working great for a few weeks now. I would definitely recommend.

Ordered this for my wife’s car. Followed a video I found on YouTube for the install. It was a breeze for me however I’m pretty good with installation or parts on vehicles.Remote start works great!

Works as expected on my wife’s Mazda CX5. The installation was very easy with not issues.

It works fine in CX-5 2.2D LUX AWD AUT 2014. Easy to install&configure it. Thank you guys!