TRIGORILLA ANYCUBIC 3D Printer Rapid Resin 405nm for Photon UV Curing LCD DLP Printing 500ml, Skin

Description

Colour Name:Skin  |  Size Name:500ml It is widely used in many fields such as industrial parts, garage kits, craftwork design, education, archaeological model, clock and eyeglasses, etc. Please confirm that the UV wavelength of your 3D printer is 405nm. Specification: Size: ~500g/500ml, 1000g/1000ml Color: Black,White,Grey,Yellow,Green,clear, etc Main material: resin monomer , photoinitiator Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s Resin parameters: Solidify wavelength: 405nm Hardness (D): 79.0 Viscosity (25C): 552.0 mpa.s Liquid density: 1.100 g / cm³ Solid density: 1.184 g / cm³ Flexural strength: 23.4 Mpa Tensile strength: 23.4 Mpa Elongation frequency: 14.2 % Precautions: 1. Storage 1) Keep away from light and sealed at room temperature. 2) It is recommended to store the resin under 15C -35℃ in a sealed container. Avoid any dusty or moist environment. 2.Usage: 1) Shake well before use. Avoid any direct sunlight during usage. 2) Do not put in the mouth. Keep it away from the children. 3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated. 4) For accident contact, please wash by plenty of water immediately. Seek medical advice if necessary. 5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness. 6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues. Safety Information: 1)Keep out of the reach of children and animals 2)Always wear gloves and eye protections before use to avoid direct contact with skin and keep room ventilated. 3)Do not be used for products intended for internal use or in contact with food or drink items.