Large WiFi Router Guard Cover (Made in The US!) Faraday cage Shields EMF Your Router emits so You can Still use The Router While reducing EMF Exposure

I looked around for a long time before I settled on this box unit and it is the BEST! This is a Faraday Cage (fancy term for any wire mesh box that contains EMF produced inside and shields from EMF coming in from outside). The design thinks of several things that other brands do not. (1) it is a substantial heavy duty wire cage that really is tough and will go the distance. (2) The unit is designed to allow most routers and their wiring to fit without problems. (3) The unit splits into top and bottom halves so you DO NOT have to disconnect any power or connector wires to set it up. This is mission critical as when you unplug your router, you will likely erase all settings which means you will need to reset them yourself (good luck) or pay a service call to have your provider send out someone who knows what they are doing. With this unit, all you do is divide the box, fold in the router and wires, ease the other half into place - and VOILA! You are in business! I used an EMF meter to measure EMS output of the router OFF, RUNNING BEFORE and RUNNING AFTER and this unit returned the EMF output to the same as it was with the router OFF. This one works!

Works great. I know this because I have to tilt the lid back a little to allow more of the wifi to reach the back room.

This well built Faraday cage offers protection against electromagnetic radiation from router/modems used for wireless Internet service. There is inevitably some degradation in signal strength, but not enough to interfere significantly with Internet usage. The cage is 12 inches long, 11.75 inches high and 5 inches wide, designed to accommodate most current modem/routers.

Love this. The Wi-Fi does not work as well, but I expected that. Can no longer sit at the end of driveway and use the Wi-Fi. It works in all other parts of the house, though sometimes a little slower at times. Still works fine and I’m very happy knowing much less exposure is happening.

Considering how expensive this thing is, when it's just a metal cage (albeit a metal cage where the holes probably were not sized arbitrarily), I feel like the least they could've done was stuck some rubber feet on the bottom. As is, the cage has a fairly high potential to scratch whatever surface it is put on. That said, it works well enough, and it fits my router, but just barely - my router has all the wires coming out on one of the long sides, but the hole for them is on one of the short sides.

My wife has a mild sensitivity to EMF radiation. We installed a new HughesNet Fusion system and my wife began to tingle. Not painful, but uncomfortable. I felt nothing. After installing the Router Cover her tingling stopped. A few days later I removed the cover and forgot to put it back on. She began tingle again and did so until I put the cover back on. That’s the good news. The bad news is it does impact the signal. In our case this isn’t too bad an impact and I have patch cable for a direct connect to the router should I need it. This cover is not a perfect fit for our Fusion system, but it fits well enough to stop the tingles. Your mileage may vary.

Picture shows a metal bottom, this is nothing but a top hat . Signals bouncing downward and out. Will return to Amazon

It must be blocking some of the emf because it does also block WiFi signal. During the day time I leave the lid off to connect devices to the WiFi and while sleeping put the cover on.

Our friend looked at it and told us its the metal box that businesses (like his) receive packages of paper in. A metal paper holder. Not expensive. So the $100+ dollars you pay are a scam. Its not made to protect you. It does block wifi though, a lot. So if it helps a bit, it also renders your wifi useless.