Weller 7235 Replacement Soldering Gun Tip 2Count (Pack of 1)

These work well as replacement tips for my soldering iron. They heat up pretty fast and they have lasted a while.

The tips worked great. To install on my gun you have to bend the contacts 90 degrees to get them installed correctly. It was not a problem to do though.

Replace the solid gun tips with the new ones. Work good and good price.

much better quality than the original-I nearly threw the soldering gun out but found the tip had a hairline crack and wouldn't heat properly. this solved the issue and is heavier duty.

Perfect fit for the old Weller model 8200. This one is a little thinner than the original bit got bent after a couple uses, But works great.

Worked as expected.

If you have a 7200 gun, these are the right tips. These tips will work with a Weller 8200 soldering gun, but are not the same. As some have pointed out, older 8200 guns have hex nuts instead of set screws, so the back ends of the tip need to be bent. That has always been the case since the bending has to be done after the nuts are put over the ends. It would be impossible for them to sell prebent tips without the nuts. If you want the prebent version for the 8200, you need to get the  Weller Copper Soldering Tip 7135n With Nuts .If you have an 8200 that uses nuts, but you still want just the tip, you need the  Apex Tool Group 7135W Replacement Soldering Gun Tip , which comes with two tips. If you have a newer 8200 with set screws, these 7235 tips will work, but aren't the ones I see pictured with newer 8200 guns. Note that these tips are made by the Apex Tool Group and carry the Weller name, so the ones I mentioned aren't an off brand.If you have an 8200 and want to know what the differences are, why these 7235 tips will work, but why you won't end up with the same thing, then read on. If you have a 7200, these are the genuine replacement you need.Even though the individual tips without nuts for an 8200 have come unbent all along, what has changed with this set is the length. Since the wide end of the tip starting at the bend is the same length and shape as the tips for the 8200, you will be able to bend the wide ends and still have things fit into your gun. When you look at the front section of this tip, you can see that the narrow portion is a half inch shorter than it is on 8200 guns. That means there's enough room on the wide end to put it through the nuts and bend it, but it means that the overall length drops by about half an inch. It also means that on the newer guns with set screws, these should plug in just fine, but if the narrow end of your tip is currently longer, you won't end up with the same thing.The pictures show how these compare to the tips for the 8200 guns.

Good fits Harbor Freight soldering iron

Solder tips are for my Weller soldering guns and are exactly what originally came with the guns. Good product and looks like original manufactors product. Price was also very good compared to buying in retail outlet. Thank you!

Good quality 👌 fast delivery

I own 2 weller solsiering guns and the 1 weak link is the tip. So multiple replacements at a reasonable price is a welcome thing in my work area.

Pièces de rechange pour mon gun a souder

Perfect product and it fits and working good. I'm glad I bought it.