PhanteksEclipse P600S (PH-EC600PSTG_AG01) Hybrid Silent and Performance ATX Chassis -Tempered Glass, Fabric Filter, Dual System Support, PWM hub, Sound dampening Panels, Anthracite Grey Gray

Phanteks cases and fans are very good overall and support team is top notch. The Eclipse is loaded with features and it’s nearly as large as a full tower case. Building a computer and upgrading components inside will be easier with the Eclipse than the majority of other mid-tower options. The stock fans keep things cool. The fans may not spin fast, but their design allows them to effectively push a lot of air and keep it moving without having to ramp up to insane rpm’s. The case is insulated. According to Phanteks, it used sound insulation designed to reduce fan noise emanating from within the case. Hard drive bays can be installed in 3 different locations. The included fan hub is convenient and straightforward. Cable management is a cinch. The front I/O has two USB A and one USB C connectors, a reset button, and separate audio and mic auxiliary ports. Audio and microphone quality thru the front I/O is fantastic. It transmits loud, high quality sound with no interference. The Eclipse has plenty of clearance for fans and radiators and the tracks on the top and front of the case allow multiple cooling configurations.The side panels open wide and are removeable, which makes everything accessible. The front and top panels can be removed as well. Leaving them on suppresses fan noise, but they restrict airflow somewhat. Removing them increases airflow but fan noises are more audible. In my experience, the front and top panels can be left on most of the time without negatively affecting the temperatures inside the case. However, under extreme loads removing the front and/or top panel can lower temperatures a tad. Airflow is good enough that removing the panels only made a difference of a few degrees. The best way to improve airflow is to upgrade the fans to something like the Phanteks PH-F140MP_BBK02, and then tweak the fan curve on the motherboard. But only people who push their computers hard will need to upgrade the fans. In its stock configuration, the Eclipse is rated as one of the coolest mid-size towers on the market. My experience confirms that.I will nitpick a few things. The PSU shroud cannot be removed. That is a bit odd considering the versatility of the case. The space behind the motherboard (where the cables are) is a bit narrow in proportion to the massive size of the case. That space isn’t narrower than other cases (it’s wider than my last case), but a few millimeters of extra space would’ve been appreciated. Lastly, the tracks that secure the fans are thin. They aren’t flimsy, but they don’t feel as sturdy as the rest of the case.Overall, this is an excellent case. It has a simple, modern ascetic that doesn’t scream “Gamer” and it’s available with clear or solid panels. Solid panels are surprisingly uncommon these days, but that’s my preference. The solid panel option looks slick and should offer better cooling and noise suppression because of the additional insulation. The Eclipse is quieter and cooler than my previous Thermaltake cases, and it outperforms the cases my friends use for their computers by a longshot. The sound insulation works well enough that I can have the computer on my desk just a few feet from my head and I hear nearly nothing when gaming and watching videos.

This is one of the best cases I’ve ever used.Came incredibly well packaged.It’s designed with the user in mind centering on efficient cable management, style and airflow functionality.This is a very roomy case, (on the bigger side of mid tower specs) and not light at all but incredibly durable feeling.It’s constructed like a tank with an excellent paint job as well!Everything is substantial and totally functional.Swing out and sound proofed (on the steel side panel) and only “sealed” on the tempered glass on component side.Removable front and top airflow panels with mesh filter and screens, room for 140mm or 120mm fans, (comes with 3-140mm units) fan header is built in for pwm or 3 pin arrangements.Tons of SSD and HDD cages if needed, as well as sturdy feet.Front cover is easily removed to clean filter and is magnetic.There is also a filter at the bottom for the power supply.Motherboard standoffs are pre-installed (ATX)Comes with handy plastic case containing mounting hardware.Nice touch!Top placed power button that’s also lit.Front flip down panel has USB ports and reset button. (No HDD light)Lots of Velcro micro straps located at strategic points where wires and cables are routed.The build was extraordinarily easy to do.It looks great, and at $149.99, packs one hell of a good value.The only cons for me are the plastic sliders where cables come through to the motherboard.Probably needs just a few rubber grommet style holes with these same covers maybe?2nd: add a couple dedicated grab handles for moving around?Lastly, the 3 included 140mm fans are not PWM (4pin) so there is no MB control off the included case fan controller (the controller supports 3 or 4 pin regardless).Excellent job Phanteks!

Purchased this case for my new PC build as i switched from AMD to the new intel 1700 12gen processor. Had to start over with new everything and this looked like the perfect case after much searching. I have to say im impressed, the quality of the material, design and layout are all great. Yes it does a pretty good job of keeping things quiet and airflow is good too. And an added plus its fairly simple but modern sleek design allows for plenty of surface space for custom paint. See attached pictures to see the before and after if you're curious.Cons, not much room in the bottom for harddrives/storage if you use them. Considering most newer builds need those larger PSUs to provide that extra power you loose a lot of space, especially with all the cabling. Aside from that i dont really have anything else con wise about the case to mention.As a mention of note, i had to order, return and reorder this case three times due to the warehouse sending me the wrong white case until i just gave up and purchased the gray one instead. With a week turn around each time and calls to amazon i just gave up lol. In the end it the case is still superb imo. Just keep the above in mind if you order the glacier white and they send you the matte.

Lo compré con el motivo de poder meter una 4090. Este gabinete cuenta con el espacio suficiente además de que cuenta con mucho espacio para ssds y discos duros. Muy fácil de trabajar con él y la función de poder quitar o poner los paneles para un mejor flujo de aire o disminuir el ruido me parece genial.Excelentes materiales y con suficientes puertos para usb. Es algo caro para un gabinete pero vale la pena 🙌

Primo acquisto di questa casa, devo dire che il tutto mi soddisfa, dall'imballaggio del prodotto agli accessori e semplice configurazione , grazie agli accessori compresi, l'assemblaggio della mia build è stato semplice, bello il colore bianco, e aspetto esteriore, possibilità di rimuovere i pannelli.

Tiene casi todo lo que vayas a necesitar ya pensado, en mi caso he podido meter un radiador con push&pull en la parte superior. Me encanta quese puedan instalar ventiladores de 140mm y que ya traiga 3 incluidos. He mejorado el airflow de mi sistema usando menos ventiladores y mis temperaturas redujeron 10 grados en carga máxima, eliminando todo estrangulamiento posible.Se puede desmontar todo, se puede trabajar cómodamente tanto desde el lado izquierdo como desde adelante o de arriba. La fuente se mete desde detrás.La gráfica se puede colocar vertical con un ryzer, quizá una pega que se encuentra es que los disipadores de las tarjetas de 2022/23 ocupan más de tres ranuras, dejándo los ventiladores demasiado cerca del cristal si se coloca en vertical la GPU.Trae un hub para ventiladores, esto ahorra muchos dolores de cabeza en conectar y ahorra tener que comprar uno.No hay conexión de aire entre el ventilador de la fuente y el compartimento principal, por lo que obligatoriamente la fuente deberá tomar aire desde abajo, donde se incluye un filtro.Trae cuatro bahías de discos duros antiguos en caso de que tengas y tres bahías de ssd o disco pequeño justo detrás de la mother, estas se sacan y ponen mediante un mecanismo de gomas.El cristal templado y la tapa trasera traen bisagras y se pueden retirar para trabajar seguros. En el caso del modelo Eclipse, el cristal está levemente tintado de negro, lo que le da un toque elegante.Todo se sujeta firmemente y se retira sin mucho esfuerzo, hay imanes y belcro por doquier.Adelante y arriba puedes poner las tapas en invierno y quitarlas en verano, todas las partes vienen con material de insonorización, por lo que es muy silenciosa de por sí esta caja.Por nombrar más facilidades, hay tadas al costado de la mother para pasar cables y debajo de la parte delantera de la gráfica para pasarle sus cables pcie de manera de que queden con cierta elegancia.Es una caja que recomiendo mucho montar, es calidad y tiene de todo.

L'un des meilleurs boitier voir le meilleur que j'ai acheté. Le boîtier est très lourd, ici pas de tôle fine comme du papier de cigarette, c'est du costaud. Packaging de grande qualité, facilité de montage, silence.Sur ce dernier point vous pouvez encore améliorer les performances en utilisant des Noctua ou des Artic p12 ou p14.Les deux panneaux latéraux sont alimentés très fort, c'est vraiment un sacré luxe sans même parlé de la possibilité de mettre 10 disques dur ...Je recommande et suis certain que personne ne sera déçu de cet achat. La livraison est un peu plus longue mais celà en vaut très largement le détour. Il émane une sensation de qualité et de résistance du produit vraiment au dessus de la concurrence.

Superbe boitier très bonne qualité on en a pour notre argent packaging parfait très bien protéger, 1er boitier Phanteks super je recommande. Ya pas photo entre un boitier entrée de gamme et un boitier comme celui la. +++