LED Channel Wide 6-Pack, Aluminum Profile with Complete Mounting Accessories for up to 16mm LED Strip Light, Perfectly Suit for 16mm LightStrip

Channels are high quality, straight, and fit the Philips Hue Lightstrip nicely. My project involves fabricating LED lighting to be installed under three parallel floating shelves that are 62” long. I cut the aluminum channels to 57” to accommodate Hue Lightstrips cut down to 52”, plus 5” for the base unit power connectors, and left 2.5” of power cord to get through cabinet sides.The LED portion of Hue Lightstrips fits nicely into the aluminum channels, and the diffuser strips fit nicely as well. However the widest part of the Hue power connectors, although barely fitting into the channels, do not accommodate the diffuser. As result I needed to improvise by cutting off the sides of diffusers around this piece, and the results were fine.Another nit - the clips provided. It would have been great if they were the same color as the aluminum channels I ordered (black), but they are silver. I was prepared to spray paint the clips black but I ultimately opted to use 3m double-sided tape instead.Other than the two minor issues noted above, the product is well-made and will contribute to the success of my project (will update with photos when project is complete). The low profile of these channels is visually appealing, they are easy to cut to size when using a quality mitre saw, and they effectively mask the “side lighting” of Hue Lightstrips.

These aluminum LED channels are very well made and easy to work with. The diffuser strip works very well and all mounting hardware was included. One thing to keep in mind when diffusing LEDs is that the further you can place the diffuser from the LED, the better the diffusion will be. Because these are low profile channels, you will not be able to get a good separation distance for ideal seamless diffusion. This is a common problem with ALL LED diffusion products - they cannot overcome the laws of optics :)This product is very good - I highly recommend these LED channels.

Excellent quality

These rails are the minimum size needed to accept nanoleaf essential lightstrips. they fit in very snugly on all dimensions but work without issue.Because they are so thin you also won't get as much scattering of the light versus a strip with a deeper channel but they are serving me super well!I ended up not being able to use the mounting hardware since they add just a mm of width to each side so will be using command strips or double sided tape instead.

This was exactly what I wanted. Almost got the channels with the curved diffuser, which would be okay except I had a lot of both inside and outside 90-degree corners in my install. All the corners look amazing. Pro-tip: if installing into wood just drill small holes and use wire nails (aka picture hanging nails) and a nail punch to install the channel. Makes it really easy, no countersinking required as the nail heads are very low profile, and the led strips adhere over the top of the nails without big bumps. Made my installation on the inside edge of our gazebo look like a pro did it. Maybe now I'm a pro though...

Last winter I picked up some Hue strips to attach to the bottom of my monitors and desk shelves so I could have some task lighting without interfering with the displays. I tried 4 different kinds of adhesive tape to stick the strips to the plastic of the monitors and painted steel of the shelves. In every case the strips peeled off; the last time was with Gorilla tape and it kept them up there for the better part of 6 months.Also, the strips themselves shine in 180 degrees, which meant that the light was right in my eyes as well as on my desk. I'd rigged some black plastic pieces, though was never very happy with them.So I ordered these channels and they're pretty close to perfect. The light strips fill them completely without interfering with the diffusers. I was able to easily cut the thin aluminum on my miter saw. And the plastic diffusers with a large pair of scissors. The connections don't fit inside of the tracks, though they're nearly the exact form factor. The sides of the track block most of the light that would otherwise shine into the room and my face. They stick substantially more securely to both plastic and metal than the strips ever did.

I usually rate my purchases but don’t usually write a review but the quality of this product is GREAT which seems to be harder and harder to find. The aluminum trays are perfect strong but easy to cut. The frosted plastic strips are also very durable (especially helpful when installing the long sections onto the trays. EVERYTHING snaps tightly together so no worries about it ever coming lose. Great product!!!

I purchased a Muzata brand set before these where available. Muzata raised the price so I found these which were cheaper. These are thicker and of better quality than Muzata. Would buy again if I need more. Note: All of the end caps do not have holes. Half have holes and half do not. Only hope they honor the warranty if the covers start two yellow within two years.Update: No longer cheaper than Muzata. Guess I will be buying Muzata next time.