Chrome Gauge Ring Dash Cluster Bezel for Ford Mustang 94-04

Worked great for me. I had removed the clear bezel a few years back so it was easy installing these trim rings. I used a thin strip of 3M tape to adhere them to a Carbon Fiber gauge panel insert. I've read that many have tried to insert these with the clear gauge cover in place with lots of issues, scratching. Easiest way is to cut the clear gauge cover off with a cutoff wheel. Gauge cover is stuck on in a few areas only and not all the way around. Add thin bead of RTV sealer to the areas that were cut off and you are all done.

Tools needed: T15 torx, t20 torx, tape, razor blade knife and clear silicone. So the rings are really easy to install. Watch the YouTube video on how to remove the clear plastic housing. After you get it apart, slide the rings through there designated slots sideways (fit right in without a problem) through the back holes. Using a flat head screwdriver with tape wrapped around it (tape protects from scratching glass) and your fingers, clip the rings into place. The clips aren't very good. The clips on the four some rings clipped right on. The two big ones not so well. I took a razor blade knife and trimmed around the housing where they clip in at and that worked very well. Then i used clear silicone on the clips to make sure they held. Had to deduct a star because they are not plug and play but after they are in it looks amazing like a new car.

This is great way to upgrade look of gauges. Fairly easy to install. The small rings snapped into place with no effort. The two larger ones took a little more effort . Had trouble getting one side to click in place so I shaved that spot on cluster a little and it helped. I did add some glue to each one after I got them all clicked in place for extra reassurance. Cheaper than everybody else and they look great definitely recommend.

Added these to our '95 mustang after a complete rebuild. They look awesome definitely adds to the whole look of the dash. They come quick and were super easy to put on! If you're looking for something that's easy for an upgraded look I would say grab these now!

Easy installation (though, in fairness, I have removed this part of the dash before. There are a number of videos online to guide you if you need more than the instructions give you. Finished product looks great. I would definitely buy again. This is one item Ford should have installed.

Trim rings look great in dash, makes your interior look custom and expensive, and they are easy to install. Great quality.

They look really great but the fitment issue on the large rings are as others have stated. I just used a dab of a flexible plastic adhesive and they are fine.

Great addition to a boring dash. It made it looks great! Had a little trouble getting the big rings to stay but with a little persuasion it stayed in perfect!