Dulytek DM800 Manual Heat Press Machine - 2.5" x 3" Dual Heat Plates - Precise Two-Channel Control Panel - Portable, Sturdy, & Efficient - Bonus Accessories

This thing was packed incredibly well, and it was awesome to get a few goodies with it.A neat little piece of kit that provides a decent value for the money. Be aware however, that this little machine's results and durability reflect it's price point. The handle provides enough leverage, that any adult sized person will be capable of generating enough force to bend and/or break bolts and the fulcrum pin quite easily. In short, it's quite easy to apply more force than this thing can handle.With that said, if you don't over load it and don't get too greedy with the pressure, this thing can produce amazing results. If you want to sit down and process ounces of material at a sitting, this is probably not the press for you. However, if you just want to do a gram or two at a time (I recommend staying under a 1.5 grams for best results), it's tough to beat this little press. Starting with a flower, I can squish and be dabbing faster than I can get a joint rolled.Keep your expectations in line with the price point of this machine, and they will be exceeded.

I window shopped this and other units for a couple months. I think the choice was a good one. Unit is built solidly.Easy to setup. Kind of awkward to actually use. Really could use a more stable base with some sound footing. Just a small rubber cover on bottom edge would help. This is actually the second unit purchased, no troubles. First unit passed on to a friend who shared with a friend who in turn bought one for themselves and love it. I really do like this press, If I ever decide to upgrade Dulytek will be the first place I shop. Want to add this. My second press after a time developed a problem. I called dulytek they Emailed a shipping label and the unit was back repaired and wonderful again in a week. All during the Covid crisis Outstanding Dulytek

I am disabled and have issues with my hands. It made the flat iron method nearly impossible for me to do.This however, was easy to use. Slight adjustment on the adjustable pressure nut as was told in the ad. It was not hard as that is one task on bad days I normally couldn’t do it ot was hard at all. No problem at all.I had great quantity and quality on my first run. The flavors are not lost to the process as it can be with other methods if you are not careful.I was quoted about $300 locally, which I was willing to bite the bullet and do if I must. My final total was I think around 209. So the price was great and the shipping fast.Highly recommend but have only used it on a limited basis so far. Take that as you will but total beginner with an actual press, on the first go, got high yield and high quality with a very nice flavor.

I have been using this press now for about 4 months. I only gave 4 stars because I had a problem with my original unit. After contacting Dulytek, they exchanged it quickly and at no cost. I was very impressed at the customer service. I will certainly get a dulytek if I decide to ever upgrade.I'm still confused when I see negative reviews for this unit. I'm convinced that they just didn't know what they were doing. Now that I have my settings locked in and am used to the machine, I consistently get 20% yields.Just do a bit of research online before trying it out.I wouldn't recommend pressing more than 1 gram. But if you need a personal press, it's much better than standing on a hair straightener.

I use this in my shop to make any job where heat and pressure would make it easier.-Folding stock paper-pressing glued material-pressing/embossing logos into stock and light materialsnot sure what this rosin stuff is, but I could see it being a good extractor or juice press in a pinch.It works. I guess that's my review. It isn't the most ergonomic device but it hasn't failed in a year of daily service.

Very happy with this press so far. I have pressed about 10 times so far and am getting a 20% return on average using temps between 175 and 205, I have been using the same flower on all presses and encourage you to start with 1/3 of the capacity at various temps. I also strongly encourage the pre press mold and micron bags (great price) but more importantly adds a little extra yield vs just throwing a nug in with parchment paper only.

The actual press comes not so ready for very much pressure but if you apply a C-clamp to the spot where the main load holding pin goes to keep it from opening up that fixes it. Also, I ended up putting a number 12 screw with a nut in place of the load bearing free-floating cylinder that it comes with. It makes no sense to me that it is able to just fall out. Easy fixes, both

At first it never worked they told me to fix it and then the bottom plate stoped working and they sent me a new one but it was stripped threads make it almost not work but I payed full price and don’t get a working press and I asked them about me needing to tap new threads in and no answer so mabie this will get a answer I don’t know I don’t like the broken 400$ plus total cost to get it to Canada was a waste of time to have it all rigged up like this it should just work out the box

Do not buy this spend the extra few hundred and get an actual working press.. sooo many issues with this.. they are not helpful as a company and this machine doesn’t work.. spent 400 plus and can’t even use the damn thing and when you email them they use every excuse not to help you...

I've wasted an enormous amount of bud trying to get good yields out of this thing but it just lacks adequate pressure/functionality. I've never got the nut down to the highest pressure which I'm convinced is impossible with anything in the press and the handle was bent out of place upon receiving this item.I would stay far away from this press, spend the extra money and get a real hydraulic one.

The unit works very well and extracts quality rosin. QC needs to be stepped up as it was shipped with one of the keeper pins in the lever was partially inserted. Had to dig out some channel lock pliers to seat it properly.All in all, a great little unit

This is perfect. I couldn't have asked for a better product. So easy to use and the instructions are so clear. Thank you.