Apevia CF6015S-5 (5 Pk) 60mm x 60mm x 15mm Black Case Fan W/4PIN Molex + 3PIN Motherboard Adapter

The media could not be loaded.  The fans are great. They are the right size 60mmX60mmX25mm. When they said they were quiet I was thinking they were not going to be noisy but these fans running at full speed/power (12.4 volts) are almost silent and they move more air then most others that are considered quiet. These fans also have a really low start up voltage. About 2.8 volt which will allow for a wide speed control ability. See photo and video. I am currently testing one of them to see how well it can handle a voltage higher then 13 volts. It currently is set to 18 volt and has been running for over 12 hours without an issues. I will update info as soon as it burns up (if it does) with the peak max volts and the length of time it ran.The only thing I think could use an improvement is the standard pc 12v/5v power plug added to the power line. The pins inside are really loose and wiggle real easymakes it hard to plug into main pc power (also see pictures). Overall I love these fans and will be buying another set soon. Can’t beat the price for a pack of 5.

These are cheap fans and it's very obvious. You get what you pay for though. Be gentle screwing them in because the threads are cheap plastic and strip easily. Also, the picture doesn't really match the product but it's just the sticker. The sticker you see in the picture is not what the sticker is anymore. It's a black sticker with a white "A" in the middle.I read reviews on these fans claiming that they're quiet. They are somewhat quiet in terms of noise from air. They are not quiet in terms of the motor. The motors in these have a high pitch wind to them that is very noticeable. I tested 8 of these fans and they all have it, so it's not a one off. There's also a very subtle clicking to them. I would rather hear loud air blowing than the ear piercing high pitch wind these things produce. Would not recommend.

Fans are just fine. The "A" logo is properly centered which seems impossible for some manufacturers to get right. They are relatively quiet, but push plenty of air. I got 20 to keep 96 hard drives cool. Chia mining ya know. The fans are permanently wired with 3 pin connector so if used that way they transmit the RPMs to the mobo. They came with a 4 pin molex pass-through with 3 pin adapter which is the way I used them. All wires are black and look great. I've worked hard to keep this mining rig clean looking and these helped out greatly. Thanks Apevia.

Received 3 fans and the motherboard connector portion is not even close. The connectors I received are the same that are on a motherboard, not ones you plug onto the mother board.

I have these running at full 12v power, and can barely hear them running. However the output is only at about 75% of other fans ive had in the past running on the same power source. Maybe thats why theyre quieter? Downtuned from the factory? Stilla great deal, the output is not terribly relevant to my application ventilating an aquarium hood.

Good fan. A little underpowered, but functional.

I'm using 4 of the 5 fans that came with this pack. 1 of them is dying and when initially powering on the PC creates a horrific sound from the dying fan. The others are working ok for now.

Used these to replace the fans on Original Xbox consoles (Thank you for the included adapter). Mounted them with some double sided tape on the bottom and electrical tape on top, which is nice. You can also 3D print mount for them, great stuff.