ToolTronix 1800W Bench Mounted Electric Router Table Aluminium Surface 460mm x 335mm, NVR No Volt Release Switch, Three Feather Boards, Extension Tables

For the money it’s excellent value this is good quality well made easy to assemble built in 40 minutes attached router and never used one of these before but the functionality is very good it’s a nice size fits perfectly on my bench just did a couple of trial runs and it did a good job but after 20mins had to leave it as I was away on holiday but looking forward to getting home and really getting in to using this

For the price this table is a reasonable buy but do expect to do a bit of fettling. The major problem is from the side supports, which in manufacture appear to be drilled on a flat sheet of metal plate then the plate was then creased into its shape. On my table fitting the screws through the holes into the cast aluminium main plate caused a step from the Steel side plate to the Ally plate. Rectified by clamping a long flat piece of wood across the top of all plates, re-drilling the mounting holes and re-fixing. Problem fixed.I have a Trend Router which is taller than the space for it to be put under the table, fixed by adding blocks to the legs.Changing the height of the router bit is not the easiest of actions.Routing a middle channel in a small piece of wood (150mm) had the wood move into the space for the sawdust extraction and a wonky channel resulted - had to use a solid piece of wood for a fence.Overall I find the table of good quality of materials, let down a bit by drilled holes to fit side wings. Instructions were there but most of it is simple to put together. Value is about right for cost. Possibly not for full on professional use

The router table was easy to assemble, in part because it has a fantastic instruction book. For the money it is excellent. It will need anchoring down before use, but there are bolt holes in the feet for this purpose. The cable for the safety switch is quite short though so if you do not have a socket on the bench where it sits it is unlikely to be long enough. It is not difficult though to open the switch and replace it with a longer cable or plug it into an extension. All in all a very agreeable product.

some people say this it a good router table for people who potter about in their shed yes I would say its ok for any thing else no way nothing is straight the wholes are not always where they should be it murder trying to line the parts up and it does not fit all routers it is to be fair for hobby people for them I would say great for more advanced by some thing on a more know legible advice.

on assy none of the attachment bolt holes line up, extension tables do not align with the cast router piece of the item. Assy instructions not very clear.

for the money this works very well easy to set up and has given a good finish on my work very happy with the table

Good price for a budget table. Solid enough once setup.The setup diagrams state screw, then washer and nut behind, but personally I put screw and washer in-front and then used the nuts as they are of the locking type with gripper. Sits better on the table arms and legs.I used clamps and big spirit level to setup table completely square, its good now.I have a 1/2" titan router that just fits perfectly.Clamping screws were too long and limited the ability to tighten locknut on the collet, so I cut them shorter.And also resited the nvr switch as it was in the way.Still to try but happy with setup so far.

Order arrived fast.Packaging was rubbish, parts loose everywhere. There was a large hole in the box so I was surprised nothing fell out.Instructions are very basic so I watched a Youtube video on an Aldi Workzone clip (almost the same table).There were spare nuts/bolts/washers, good if you were to lose some. I did have 2 parts left and no idea what they are for!.Assemble was easy but some of the holes where the legs attach to the deck were not that well aligned.The Micky Mouse system for attaching the router is poor so I bolted mine direct to the deck, drilled 4 holes, countersunk the 4 screws (I have 2 routers so happy to have one permanently on the table).The NVR switch is a nice touch; however, the power cable was only about 2-3 feet so I replaced that with a 8 foot length.The gear on the deck (fence etc) is good as this table is only meant for small projects anyway.I also fitted a starting pin to my deck.*************************