Plumb Pak PP836-74VBL Universal Fit Toilet Handle Tank Flush Lever, Decorative Latch Door Style for Front, Side, or Angle Mount, Oil Rubbed Bronze

I'm so glad we got these. Took our builder grade toilets to a new level. It's the little things sometimes and this little thing made all the difference in the quality feel of our "cans". Recommend!

I mean if you like how it looks, get it, if you don't like how it looks, get another one that you like how it looks. They're all the same, the wife just wanted stuff to match to other things in the bathroom, so we got this one. Honestly I feel like these shouldn't have "stars", just a works/doesn't work button on the review.

After trying and returning several different replacement levers from a big box store, I happened to see this one for my angle-tank installation. After using a vise to put a lateral 90-degree bend in the brass rod, It has the necessary stroke to lift the flapper fully to allow the tank to empty. That was the only modification needed, other than adjusting the length of the lift chain. No more worn jiggly lever. It costs a little more, but is well-made, attractive, and worth the price.

I attached the picture because the toilet is a standard old toilet and I wanted to show that this lever takes it up a notch. There's an upgrade in the works but the lever broke and I had to replace it right away. So being noted, price was important. I've already replaced one toilet and this lever looks great on the long bowl, chair height toilet. Another thing I like is that I found the faucet with handles that will match this lever. I'm replacing the sink/vanity too.I never thought about it, a lever is a lever, but since replacing the flipper type lever, I really like the substance of this lever. Also, the metal arm in the tank is much nicer than the plastic arm that broke. Frankly, it never dawned on me that the plastic arm would break some day ... after almost 30 years. Duh!It was very easy to install. The instructions were a bit unclear. The instructions directed to unscrew the washer directly behind the handle. It was so tight I couldn't do it without risking scratching up the shiny new handle. I'm 70 so my Hercules strength is gone. I proceeded the install without taking that washer off. Turns out, I didn't need to mess with it. I think that was for installing the handle on the side of the tank. Another thing that tricked me is that the handle hole in the tank is square. I thought it wouldn't work but apparently you can put a round peg in a square hole.I'm very pleased with this flush handle. Fair price, looks good, feels right (never thought that was a thing, but it is), solid performance, easy to install. I do highly recommend this handle. Amazon never disappoints, fast delivery as always. Fast delivery was a big deal on this item because I had to remove the tank lid everytime to flush or leave the lid off until the new handle arrived. I didn't like either option. Thank you Amazon!

As several other reviewers have noted, the action on this lever is as good as they come. It is mostly easy to install (left hand threads, which is standard for these). It's easy to mount and secure in its hole. And, it's easy to get the rod positioned just right for you tank and the location of the float and flapper valves. The smooth action comes from the fact that it has a relatively long sleeve bearing, and I'm really happy with that design after dealing with the low profile ones that fail rather quickly because they just can't stand up to the forces that get applied to them.The down side for some folks will be that this long bearing means that the lever extends a bit further forward from the tank surface than what you might expect. Mechanically, that's really good, but some folks might not like the look.The only solid negative is the almost worthless chain clip that comes with it. It's a bit odd that such a well designed lever would have such a chintzy clip, but there it is. You will probably end up fighting it a bit on install, or using a clip salvaged from the lever you are replacing.

We recently bought – and returned – some replacement "chrome" and "brushed nickel" toilet handles that ended up being really crummy molded plastic with metal plating (or, at best, incredibly cheap molded metal, but it sure didn't feel like it) – the edges were sharp on your fingertips, the back was hollow and looked like it would be a nightmare to keep clean – definitely felt and looked super cheapo.So glad that we went looking again and found these, and they were only a couple bucks more! I was very impressed to see that they're exceptionally well-made – they absolutely look like they could be part of a higher-end fixture set from a name brand. They have a satisfying hefty-feeling weight, are obviously real metal, have a smooth finish, and are a complete unit with a proper "real" handle. The slight bounce in the handle mechanism is really nice, the square fitting was perfect for our toilet, and the arm shape is just what we were looking for (the other one we bought was a dumb shape/angle that would have hit the top of the toilet-tank lid without a lot of awkward bending. Keep in mind the fitting does stick out a little more, so your toilet seat might contact it; this hasn't been a problem for us and we love the high-end look and functionality. Took about two seconds to install.Would absolutely purchase again. If the style matches what you need, don't hesitate – get these!

Just had to install my fourth one (across two toilets) and now have to replace one for a third time (five total). I suppose I should’ve learned my lesson after the spring or whatever internal mechanism began to wear out after three months. Onto try another brand.On the positive side, super easy to install and nice looking. If it’s in a toilet that doesn’t get flushed many times daily, it’s probably okay. But for your high traffic bowls, wouldn’t recommend.

This was super easy to install. Good quality and works as it should. Will be purchasing another for my other toilet.

Finally purchased this product after two other plastic ones broke. It is a very nice product. Durable and well made. Glad I purchased this. Also, very easy installed.

Love it! Adds a finishing touch to the bathroom and very easy and quick to install

Love it

It's been a few months hold up very well. Excellent product