HTTMT LS003- Compatible with Black 10.5 Inches Slammer Lowering Shocks Pair 1984-2013 Harley Sportster 883 1200

Nice socks that fit my vtx1300 nicely. Adjusts a little and drops my bike to make a smooth easy ride. Black color is slick on my black bike. On anything but the highest setting I will bottom out. But I have a heavy bike and I’m not 100lbs either. Not bad and I’m happy with them into my second season with them on

Put these on a 2005 Police Road King to replace the tall stock air shocks. They work perfectly and do not rub on the softest ride setting.

Purchased these to replace my 15” progressives to lower the bike back to stock size. I’m extremely happy with them. Rides smooth and takes bumps great. I have them to the softest setting.My bike is a 2005 883 Harley sportster XL and they fit perfectly. Only took the ship 20 mins to put on. Only factor would be some bikes may need longer bolts but they can be purchased at a hardware store easily.

These should be stock on 883 low's for sure. My girlfriend was having a hard time touching her feet flat to the ground on this bike and this 110% fixed the problem. Only dropping the shock length 1", I did not think that there was going to be a huge difference but it really did change the whole profile of the bike. Install and testing took about 45 minutes total.While the quality of the shocks are very good, the painting or powder coating process (whatever they use) is flawed. Both shocks had small areas where the paint/coat was chipped off down to the metal around the top of each shock, but only on one side of each. I had contacted the manufacturer and they seemed eager to help but my girlfriend was adamant about wanting them on ASAP. I have a feeling that they would have replaced them for me.

Looks great, works perfectly for what I wanted. Spanner wrench they provide is cheaply made. But overall great product

Everybody that had stock air ride on there Harley , should change from air to theses lowing sho.clean An to me better than the air shock on my road king , woul buy again

Very good for the price

Would be a five star, look and function exactly as they should. Comes with the necessary bushings, only problem is on the right side the lower bolt needs to be replaced with a shorter one to clear the sprocket(pulley) as the factory shock mounts are 1/2” wider. If you run the factory bolts in and torque to spec you will not have enough clearance on the sprocket boots. Would recommend and order again, just be sure to replace that bolt with a shorter one during install.

Todo en tiempo