EBXYA XLR Cable 2ft 10 Pack 3 Pins Balanced XLR Microphone Cable Male to Female Suitable for Audio Mixer, Speaker Systems, Radio Station

I use this for professional gigs. Saves a lot of guesswork as to what went where, in the event of a malfunction or addition.

Great quality cables. Well built. Very Happy Customer!

To avoid cable clutter, our band uses these three foot patch cables to connect wireless microphone receivers to the PA head at shows instead of having 25' cables on wired mics. We color coded everything so that each person's gear is always put back together, and so that it's easy to see who gets plugged in where. Bought these to replace the black cables with colored tape markers and painted plugs.Just received these and pulled them out of the bag. They came with twist ties attached and a set of 6 velcro cable wraps that will attach to the wires for easy storage. The colors look nice and the cable is quite flexible. The connectors seem solid, but there doesn't appear to be any indexing in the female end to force the pins to align correctly with the tab if you were to unscrew the connector to look inside - you must manage this manually, by eye. The color on the connectors is in the form of a plastic ring that could crack with rough use, but seems durable enough for almost any job and is redundant, since you can't miss the color of the cable. I did plug the connectors into each other, and to a couple microphones and a recording interface I had handy. I have had problems with loose or, worse, overly tight fits in the past that have caused problems with gear. These fit perfectly well and felt quite solid plugging in and out.The big downer is that there is no shrink tubing added at the ends to create a strong strain relief. The cable itself is flexible and may be a hair smaller in diameter than some others, and the plastic strain relief built into the connectors doesn't grab the cable firmly enough to provide the level of protection I prefer. If you never yank on these or try to pull them out by the wire, they should hold up fairly well, but I wouldn't count on reliability if these are in a higher traffic area or careless users go yanking on the female wire end instead of the connector to unplug them. You get what you pay for on these.I will probably unscrew all the connectors and add either a wrap or two of electrical tape or paint on some liquid electrical tape to add a little diameter where the cable runs through the connector's built-in strain relief and that will improve the durability. I use the correct diameter of heat shrink tubing on the cables I build, and I may decide to install some on these, but it's a hassle to desolder and resolder an end to make that happen. I only needed three, so I'll probably carry the other three as spares and add proper strain relief if they do fail in use.Still, the lack of sufficient strain relief reduces my confidence in the product and I can't recommend them as highly as I would like to. These would be 4.5-5 stars with proper strain relief. If I held back the last half star, it would be for the lack of indexing in the female plug, but that's something 99% of users are never going to notice.We're going to test them before they get used at a show, but these seem like they'd be a great cable for casual or protected use, and good enough to give them a shot on stage.

We are using them our stream and it works great.

Best set of cables I purchased. Durable and well-made for anyone who needs microphone cables that provide precision sound recording with a colorful blend. Purchasing the multi-colored cables was a no-brainer because it adds a little class to the podcast microphones when producing for solo or interview moments. I am very pleased with this purchase and would definitely recommend it to the novice or professional alike.

Los conectores son muy fuertes

I was very skeptical of the quality of these things given their price, but their quality is really good. They pick up no noise at all and the color-coding helped maintain my sanity as I wired up my 13-channel Dolby Atmos setup. I also have one really long one of these (20' I think) going to one sub-woofer and it too picks no hiss. With my previous system, I used RCA cables to go from a Denon receiver to an amp for the front three channels, and if I got really close to the speakers, I could hear hiss. It's nice to be rid of that. The sound quality is excellent.

So far so good, no problems

I bought these because I was using a mike on a desk, through a DI box into the computer, with a 3m XLR cable, which was ridiculous! These patch leads are ideal for the job, and I've since found other applications for them. Sound quality is pretty transparent as far as I can tell, they seem durable enough for purpose (I'm not going to be throwing this mike around a stage or anything) so well worth buying.

Great set of XLR cables with colour coding to identify each source and input. Perfect for our Audio Interface. Very well made.

Love the colour. Length is perfect. Quality is awesome.

Excellent cable and the right lenght

See title