Front Outer Panel Touch Screen Digitizer Repair Replacement Glass Lens (NO LCD Screen) with Y-Tool for Nintendo DS Lite DSL NDSL

This screen works, but it's far from an OEM replacement for the Nintendo DS Lite. It might deserve a lower score, but it's hard saying because Nintendo seems to have designed that system specifically to be as difficult to repair as possible. Regardless, I installed this digitizer, and it pretty much works. If it isn't perfect, I have no way to say it isn't my fault for being clumsy, despite trying very hard not to be. If you're considering purchasing one of these to repair your DS Lite, good luck. You're gonna need it if you haven't done it a few times already.

It comes with adhesive pre attached and just needs its protector peeled off before you can slap it on. Has a wonderful glassy finish and feels heavy in the hand. Very good

Works very well, not a single problem installing. Feels more plasticky compared to the original DS digitizer, but still fits and works just fine. Make sure to take time in connecting the tiny ribbon cable properly, and align the actual digitizer carefully and proportionately to the LCD screen and you won't have any problems.

I bought this to replace my OEM digitizer in my DS Lite so the screen looked new. This replacement digitizer is junk, it works but in order for the touch to register, you have to press down really hard. I put the OEM one back in and the touch screen functions like it's supposed to

This is over all a good replacement, but it is a little less clear than the original. It is rather easy to replace IF you have opened up a ds lite before. The digitizer is double side taped to the screen and you have to remove the digitizer without removing the tape from the screen. DO NOT TOUCH THE SCREEN, these things are fingerprint magnets and very hard to clean. To get the digitizer to line up correctly I put the digitizer in the case and set the screen on top of it. Make sure you have the cables oriented correctly!

Great

Perfect , I don’t feel like it’s milky like other reviews, for me it’s very clear . Very satisfied with the product.

Just got done installing it and went in without any major surprises. There is a separate film for the adhesive under the screen protective film, so I needed to use tweezers to avoid getting fingerprints on it when peeling it off. Used the case to align it with the display and it didn't need any additional calibration on startup.

Works great

Si es El touch de la nds Lite, llegó en el tiempo indicado y funciona perfectamente.

After replacing the old one, I turned on the ndsl and tested the screen wondering why the touch was wonky and offset. Then I recalibrated the screen in settings and problem solved. Great replacement works perfectly.

The glass thickness is the same as the original one, glue on it is the perfect stickyness for adjusting while applying. The original ribbon cable on mine was super flimsy and broke on me, the ribbon cable that they provide is for sure much stronger. Overall the whole things looks completely different from the original but fits and works great!

Perfect 1 to 1 fit no yellowing or issues of the kind But beware the screwdriver given with the scren is one size to small and can easily strip on the screws... also, another small Philips head screw driver is required to complete the install Other than that no issues