Ubiquiti Outdoor 4-Port PoE Passthrough Switch

I installed mine in the attic running two G3 Bullet Cameras and one Mesh AP. The NanoSwitch is connected to my 24 Port 250 watt switch via ethernet and then I branch off from the switch to my two cameras and AP. Does exactly as advertised and should hold up well in the attic. It is not a managed controller so will not show up in the Unifi interface but its only 40$! Overall love the product and works exactly as advertised.

Very handy device if you need additional 24V passive POE to power multiple devices. It will not work for 48V POE devices so verify 1st before buying. I do have 2 AP pro with unused 48V POE injectors so I'll be connecting one of them to this to power up the G3 flex. I think the form factor could be a bit smaller especially length wise. Not sure if I'll call it nano but it's small enough to be unobtrusive.

I took a chance on a used N-SW, not sure what to expect. The unit I received looks brand new and works perfectly. Quality service and product... THANKS!

PROs: * only device I know of that allows you to attach 2 or 3 POE devices at the end of a single CAT5e/6 run, especially when you're looking for something that is ready to mount outside. When that's what you need, this is, the way to go. * large enough that you can fit a surge suppressor in there CONs: * the box is rather large * 30W PoE budget for 3 devices is not a lot - I only manage to attach 2 devices per switch for that reason. Apparently there is also a 24W model out there, steer clear! * the mounting keyholes are ridiculously small - require a #3 screw. I ended up drilling 3 holes in the case under the switch * no management - but a management processor would take away from the PoE passthrough power so this is an excellent trade-off * only supports 24V passive PoE - presumption: active PoE would require management - see above While the box is large-ish, it doesn't look ridiculous on the side of a house. And if you need to add a camera or WiFi AP to an existing run, this does the job very nicely.

Bought this looking to supply power with 802.3af/at poe injector only to find that this device can ONLY be powered using ONE of Ubiquiti's POE injectors (POE-24-30W-G-WH). So I buy a couple of them only to find that when hanging a poe device that needs a mere 12v at < 5.5w. What a waste of TIME AND MONEY!!! ONLY BUY THIS IF YOU'RE PLANNING TO HANG DEVICES THAT CONSUME THE VERY LIMITED POWER IT SUPPLIES.

Nice product but I am skeptical of it's weather resistance as there are no gaskets to seal the interior against moisture. I imagine is relies on gravity to keep the interior dry however errant moisture is sure to corrode the interior after time. Functionality wise it works as expected. Assuming you've provided the passive 24 volt PoE it needs it lights up and works like any other desktop switch you may have used. I was able to power a UniFi G3 Flex off of it. I did not attempt to power multiple devices though that is an advertised function. As this is an unmanaged switched you'll not gain the benefits you would from a normal Unifi switch, granted this one is intended for remote installs and not robust switching.

Fantastic product for splitting 24volt PoE. We used for a roof install with a nanobeam and two G3 cameras. Things to note, this is not a managed switch so everything needs to live on the same VLAN. Second for everyone in the reviews complaining this doesn't support ‘standand poe’ this product never claims too. It clearly says for 24volt and if that fits the need it’s perfect.

I few months back I swapped my entire network over ubiquiti, I’m glad I did, this nano switch is part of an outside “extender” for a couple of ubiquiti cameras running over only one 5e Ethernet cable. Works great and as intended

Questo switch permette di utilizzare un unico cavo che lo collega al router e fornisce anche l'alimentazione POE passiva (24V), inoltre il router fornisce 3 uscite POE passive con cui collegare ad esempio degli access point o delle telecamere. Attenzione: non si possono collegare le uscite direttamente al PC o ad altri dispositivi non-POE, perchè il tipo di POE utilizzato non è smart, e rischia di bruciare le porte ethernet dei dispositivi non predisposti. Se volete collegare questo switch a dispositivi non-POE potete utilizzare, in uscita, un power injector POE "al contrario": collegate la porta POE allo switch e la porta LAN al vostro dispositivo, che risulterà quindi isolato dalla tensione POE. In alternativa potete utilizzare dei cavi che usino solo le due coppie verde e arancio (pin 1-2-3-6) ma questo ridurrà la velocità a 100 Mbps. Nota: l'alimentatore non è fornito, perchè il dispositivo è pensato per essere connesso a router con uscite POE integrate, ma in alternativa si può utilizzare qualunque POE injector passivo con alimentazione a 24V.

Seriously this product made my family so happy. I have it outside (I live in Ontario, Canada, so it's cold here!) rain/snow or shine it delivers internet to the backyard without a glitch. The biggest issue was entertaining in the summer time with guests and the bluetooth speakers playing. Now everything just works as expected! I can even go to the street behind my house (backyard neighbours) and get internet on their street in my car! This things has long range on it! Believe me - this thing rocks!

Grym kvalité och väldigt bra produkt!

Perfecto

Funktioniert und ist sehr hochwertig