Cabinet Lid Stay with Guide Slot Nickel Plated Right Handed

Excellent little metal stays, work well in overhead lockers in camper using lightweight furniture board and will not require adjusting all the time and tightening up like the other ones we had before. One per cupboard, these being right hand went on the right hand side of the cupboard. Easy to install and good value, they arrived quickly too.

It's a milk tinny and I had to refer to a level physics to figure ot the best mountain placing However, all said and done it works well. And a squirt of wd40 will need all the attention needed.

A functioning item which does the job.

It does its job OK. Quite a lot of slack at the joints so installation does not have to be super accurate. No instructions supplied. I did a trial fit using blutack to get the position correct. The supplied screws have rather fat heads, such that even when fully inserted the head remain a little raised - no problem for the angled fixing, but on the plain rectangular plate the screw heads can foul the strut. I found that installing the rectangular plate at 90 degrees to the strut when in the open position worked best (or you could use screws will a less fat head).

Too flimsy to securely hold up a top hinged cabinet door. No screws supplied despite stating screws supplied in the Product Description. Charged by the seller nearly £3 to return using the (usually free) EVRI system.

I was immediately impressed by the lovely finish of the metal, and it seems well made. I had limited space behind the sliders in the purpose I wanted it for, so did a mock up first to trace the closing arc. This helped me get the position right first time on the drop down flap of the "Bureau" i had made. The only difference in handedness seems to be the locking notch in the slide, which didn't concern me. A first-class, very good value product which I recommend. Thanks to all.

They don't work

Happy with the purchase