HTTMT MT194-SK Smoke Led Tail Light Brake Light with Integrated Turn Signals Indicators Compatible with 1994-2008 Ducati Monster 400/600 / 620/695 / 750/800 / 900/1000

wiring is a bear on this, you have to guess at first what wire is what, unless you already have a stock light on there, which I did not. Previous owner had this light, sold me the bike with out anything plugged in and took the light so a lot of guess work. You will end up with some wires unused, which are some of the grounds for the blinkers which this wont need as the whole light is one unit and only uses one ground. Also, other wires are NOT the same color as the ones you want to plug into as well as the wires in the back on spade connectors need to be cut and joined to this harness which does not use the same connectors. All in all a little confusing but some trial and error and you will be right there... Once you get it on and working, its pretty damn awesome, the smoke is not dark enough to distort the lights and looks great...

Put it on a 2000 Ducati Monster 750. Decent light, especially nice that it has a built-in license plate light. Also, everyone said it was dim, doesn't seem very dim to me, as bright as the original light. Cons are that the instructions are pretty confusing, you are more or less just testing which turn signal is which and which wire is the brake light. Another con is since it's changing from a light bulb to LED, the lower wattage makes the turn signals rapidly flash. It flashes fast enough it might get confusing to someone which way youre signaling. A pack of resistors solves the problem but that's an additional 7-8 bucks that I didn't think I would have to pay to get this light working. Also, the brake light connectors weren't identical to the connectors on the new brake light, so I also had to strip and crimp those wires to get this light to work. Not as plug-and-play as advertised, with an additional 10-15 bucks worth of parts necessary to get it working properly

The media could not be loaded. Required a bit of custom wiring but fit my Genuine Roughhouse 50cc scooter fantastically! The bolts are the exact same as the oem light except a bit longer so youll need a couple washers. It looks fantastic

Installed on my 2000 monster 750. WIRING WAS NOT SIMPLE. If I didn’t have previous experience I would have struggled. But it looks great, and is surprisingly bright

It’s not a bad tail light for the price. I was actually surprised it worked with my monster 750 considering older Ducati’s don’t like led signal upgrades even with resistors and upgraded flasher relays. It could be brighter though. The LEDs when the bike is on is kind of dim. The turn signals with no brake applied alternate between a dim red and yellow for that half. When the brake is applied, the signal is decently brighter. We’ll see how long it lasts but for the price, a new one isn’t out of the question. It comes with no instructions but, two minutes testing the leads to a battery you can figure it out. Black is ground. White is ON, red is brake applied, yellow is right signal blue is left (or vice versa). You also need to reuse the oem bolt spacers from the oem light. If definitely had to with my tail chop and fender elim.

I liked this I put it on my rough house 50 scooter it fits like stock, a little wiring and enjoy the integrated turn signals !

Could be brighter.

Great light. Lens needs black paint to control unwanted light spill.

Esattamente quello che cercavo

Esta homologado? Pasa itv?

Entrega a tiempo y excelente muy muy muy muy muy muy muy muy muy muy buena entrega 👍🏻 👍🏻 👍🏻

Usato per un restyling di una Ducati Monster 620ie del 2002Misure perfette , facile installazione , luci a led e frecce integrate sono i suoi punti fortiQualità abbastanza buona delle plastiche usate .Vedremo la durabilità nel tempo .Giudizio complessivo Molto Buono. Consigliato con Amazon PrimeVeloce con consegna gratuita .

Semplice molto alla moda e bello da vedere anche in contro luce o a favore della luce si vede bene quindi ottimo per la strada