SW-3T24Z Trinocular Stereo Microscope, WH10x Eyepieces, 20X/40X/80X Magnification, 2X/4X Objective, Single-Arm Boom Stand, Includes 2.0x Barlow Lens

Alright, lets get this out of the way first. If you are going to judge this against a Mantis or a Zeiss or a Bausch & Lomb you will be dissapointed. Its none of those. If you are in electronics testing and repair or even hobby work and want a well built value priced NON TOY stereo scope then you looking at the right item. I find this to be a very good bench asset in doing fine repair and assembly work. You will though need some accessories to make this work well. 1. AmScope SM05 0.5X Barlow Lens For SM Series Stereo Microscopes (48mm) You will definitely need the Barlow lens to increase your field of view for working on a circuit. Its a must have. 2. Ring light. You may get suggested another ring light but dont follow that like. You will see lots of complaints about its construction. You need the LED-56S-ZK 56 from Amscope. AmScope LED-56S-ZK 56 Microscope Ring Light LED Ring Light Illuminator with Dimmer for Stereo Microscope Well constructed, powercord doesnt get in the way and the mounting screws go thru brass PEM nuts. Much better than the plastic the other model goes through. Everything you need to mount it is in that box. 3. Different eyepieces. You really dont get any but IF...you want more cover these are the ones that fit. AmScope EG-SM Microscope Eyepiece Eyeshields or Eye-guards They arent bad and they are inexpensive to try out. Some notes: 1. HEAVY! The base is substantial! Big old piece of iron to keep it from tipping over (that wont be good). 2. Engrish. The assembly instructions arent the best in the world so look at pictures of this thing to figure it out. You'll know the main vertical rod and the locking ring as well as the horizontal arm. You may though have some head scratching with the scope end installation. A few minutes of looking at it and you will figure it out. 3. Tech Manuals and downloads. DO NOT THROW OUT THE BOX! there is a code on it that will allow you to download the digital copy of the tech manual. 4. Optics setup. If you know how to fit and adjust a pair of field glasses to your head and eyesight then this is will be very familiar. If not, you may have a little difficulty but it is pretty easy to do. Pupil distance, right eye focus, both eyes and adjust the left lens until its all in focus. Done. 5. Be sparing in lubrication! The ONLY thing you may want to do is like...show your can of CRC-336 to the paper towel and rub down the vertical and horizontal bars. TEENY TINY amount do not overdo it or those friction nuts holding everything up and horizontal may not work. 6. The cover. Yes it comes with one. Stinky vinyl, it fits and use it! That's about it. Again its not a Zeiss but its not a toy. Its value priced and with the right accessories will give you pretty decent performance. Good luck!

This is the first stereo scope I've owned, and the first I've used in many many years. I was prepared to pay twice as much but decided to take a chance. I'm very pleased! The fit and finish is excellent. I've found none of the rough edges or cheap-outs that often accompany bottom of the price range items. The base is *very* heavy and therefore stable. The chrome finish on the tubes makes adjustments very easy and yet the various knobs need only be finger tight to hold things in place. The glass is defect free and the focusing rack is velvet smooth. An additional surprise is that the eye pieces can be adjusted to compensate for my extreme near sightedness and being able to use it without glasses is a super bonus. The intra-ocular adjustment of the eye pieces is critical and it takes a bit of practice to get them set just so for full binocular vision. But, once you've got it tweaked, everything is clear and sharp. The magnification is more than adequate for my use assembling printed circuit boards and the wife is using it for her various crafts. One caveat is that the 'barrel' is just a bit bigger than the LED lighting rings (sold separately) will accommodate. I returned the LED ring and now use two inexpensive desk lamps which provide more than enough illumination.

An upgrade for us after ten years with a basic model. The ring illuminator now comes with an adaptor, so the tapered objective barrel is not a problem if you want the controllable LED lighting. AmScope was very helpful in sorting this out for us when we missed the adapter ring in the excitement of unpacking. The optics are very bright, very sharp. We may be a bit unusual, in that we leave the 'scope on our kitchen table and use it constantly with children. The base extension arm and swivel head adjustments are perfect for sharing the view. I had wondered about the stability of the unit when fully extended - kids sometimes hang onto the eyepieces when viewing. No worries - it's heavy and super strong, very stable. Thanks to AmScope (and the Chinese) for making a quality instrument affordable for family use.

Surprisingly good quality, heavy duty with clear optics and easy focus adjustment. However, you need the 0.5 Barlow lens for enough room to manipulate a soldering iron and an LED ring light. Highly recommended for the price and no need to spend more for repair work.

First off, this stereo microscope is impressive right out of the box. Quality of build seemed every inch a well built piece of equipment. Set up, without a good set of guidelines, was tricky. Online support is just that, on line support. Use the toll free number for best results. 15 minutes from dial up to hang up and problem was resolved. The Topview software is a bit awkward. If you invest the time, it can attain a satisfactory rating in the mid 5's on a scale of 1 to 10. Many of the features are intuitive, but again spend the time to fully acquaint yourself with the microscope. A ring light is essential as well as additional LED lighting. A moveable platform is also a must have.

First, i was impressed with the packing job, everything was well packed and it arrived safely. Next, the instruction manual that came with the unit did not provide assymbly instructions for the boom stand, but if you need a microscope like this you should have no problems figuring out how it goes together. Lastly, the 2X barlow lens will not give you any workroom, the lens has to be right on top of the object you are viewing, but it is awesome with the .5X barlow lens! i had to actually raise my chair a little to be able to raise the scope enough to see my object, gave me about 7-8" of work space which is plenty enough to get my iron, twezzers, or whatever i needed to be able to do the job. Recommend for anyone that works on phones, laptops and gaming controllers/consoles

I bought this for watchmaking and repair great tool this is a Game Changer would highly recommend.

If you are serious about electronic PCB troubleshooting, you need this. It is great. Sturdy stand, good optics, now we can't be without it as it unveils all the nasty stuff you can't see with a loop or naked eye.

Assistenza pessima, messa a fuoco non regolabile, spazio di lavoro insufficiente

I like it and I does the job fine for diamond setting why spend 1000$ for good stuff

Bon produit