Custom Coat Camouflage Series 3 Ounce (Woodland Green Federal Standard Color #34128) Urethane Tint Concentrate for Tinting Truck Bed Liner Coatings - Epoxy Resin

This Raptor liners tints, are great, this was my first time paining with Raptor Liner and the skid plates ended up looking great

This makes spraying a bed liner with color VERY EASY. I'm using it to spray golf carts.

Color is a lot lighter than website shows it. So beware that once you mix it with liner it will get lighter by 2 to 3 shades lighter than picture shows on website I did the light gray.I don't hate the final color just wanted the color I chose that is all. Coverage is also wrong 1 gal kit states it covers 150 sq it didn't even cover 100 sq ft more like 80 so what ever the kit says cut that in half for coverage

Hoping this helps someone out to avoid extra costs. Overall pretty satisfied with the ending result. I wanted the color just a little bit darker. Especially when the sun hits it because it looks lighter, but once it gets cloudy it looks really good. I used one bottle per 1liter of Liner. I used the raptor brand. I sprayed it at around 60-65 lbs. I did 2 good coats of the Olive color and it looks nice but when the sun hit it you could see lines and spots that were hit more then others and made it look bad. I had to purchase more color bottles and raptor to give it a final coat that was 2.5-3ft away in a circular motion. I’m glad I did that because the end result was a smooth more rough surface and it just made the truck look extremely better. Flares still need to go up but please take the time to Prep everything good and make sure all metal spots are sprayed with etch primer first. No rust at all. Some of the bumpers rust where hard to remove so I took out as much as I could and sprayed Rust remover then cleaned it well and added Rust reformer to cover it up then sprayed the liner. Came out great. Also make sure to get the adhesive promotor for any plastic or hard to sand spots. Also make sure your Spray gun has a gauge and your monitoring your lbs so you don’t have uneven consistency sprays.

I did a full paint job of Raptor liner using this Dark Olive tint on my 04’ Tacoma. The color came out great. It’s also been over a year since application and it’s holding up great. Definitely recommend.

Easy to use, perfect match I have seen some people writing that the product was "Pricey" or that "it didn't work". Well remember, you get what you pay for, as to not working, either they are full of it, or didn't follow directions. My experience says it is a great product and does exactly what it is supposed to do if you follow the instructions. Prolonged shaking of the bottle before use is critical, the company says 2 minutes, I recommend at least 4 without the hardener in it and 2 more after you add the hardener. It took 6 bottles to do my 2000 Land Rover Discovery and I am very happy with the results. Remember, this three oz bottle is just a tint, it is not paint must be added to the Raptor before you spray.

The media could not be loaded. Let it harden for 48 hours BEFORE you mess with it or it will scratch easily. Spray your surface and put it in a garage or something for 2 days THEN do whatever you are going to do.

Just priced too high I believe for what you get.