MiLTAT Watch Band for Seiko SKX007 SKX009 7002, Super-O 22mm Tapered to 20mm Clasp

I purchased this to replace the OEM jubilee band for my Seiko SKX007 dive watch that broke after four years of daily use. Although the jubilee band is very attractive, these stretch, and the pins connecting the links are known to break or fall out. The MiLTAT oyster replacement band is heavy, beautiful under light, well built, and has better clasps than the original Seiko band. Installation was a little tricky, however much easier with a second pair of hands and took less than 10 minutes. Once on the watch, it looks like a factory watch band that was meant to come with the watch and fits perfectly. Further, removing a link to get a better fit was super easy with a tiny screw driver. Highly recommended and definitely an upgrade for this venerable, classic Seiko dive watch.

I purchased this MILTAT Oyster bracelet for my Seiko SKX173 to replace the stock rubber band that would eventually crack and break over time (I've gone through three of them). I was quite surprised how, once the bracelet was affixed to the watch, it was instantly transformed from a "knock around" every day sport watch to a much more stylish timepiece that could easily be worn out to dinner as a dress watch as well as a sport watch. This bracelet is significantly more sturdier with a better fit than the stock bracelets found on my other Seiko watches. Refer to YouTube when installing the lugs which can take some time and patience as the band is precision fitted. The end result though is fabulous; there are absolutely no gaps at the lugs and everything is tight and comfortable. There is also a little "heft" to this bracelet which I prefer as opposed to lesser quality or hollow materials found in less expensive bracelets. Needless to say, I am very impressed with this bracelet and am in the process of replacing the stock bracelets on my other Seikos that I mentioned earlier.

This is my second Stainless Steel Oyster bracelet for my Seiko dive watch. The first lasted almost exactly 2 years before it failed. The center pin of the hasp section sheared in two places. Turns out the center pin was hollow. Fortunately the locking mechanism on the hasp held it together until I took it off my wrist and I didn't lose the watch. The new SS Oyster bracelet (reviewed here) appears to be very similar in construction but is not an exact copy. Time will tell if the hasp on this one is higher quality than the last one. The links and the end links are solid and it appear to be well made. I removed one link to make it fit and the pins on the removable links are solid with threaded ends (as they should be). The end links fit the Seiko 007 perfectly and come with large spring bars. The folding hasp has a double lock and appears to be well made. In addition to the removable links, there are three locations available for the end link to attach to one side of the hasp which provides additional adjustment. There is no wet suit extension. I really like these Oyster style bracelets and purchased a second one after the first one failed prematurely. Hopefully this one has a better quality center pin. EDIT - 5 years of nearly daily use and all is well. This bracelet has proven to be superior to the one it replaced. I went back and gave it 5 stars. This is a durable product.

I installed this on my stainless steel Casio dive watch ($43) to replace the black plastic band. Now it looks like an expensive watch but I can wear it when I work in the garden or whatever. It looks like a million bucks. The lockable clasp has never popped open. It was a little difficult to install because it was designed for a different watch but once I got it on it has been solid. I also have an automatic Omega Speedmaster that is supposed to be waterproof but water got inside after swimming in the ocean for 10 minutes. Since that watch is worth thousands of $s I am much more comfortable wearing the Casio. I have a couple extra in case I break it, but it’s been 6 years already since I first installed the bracelet. I bought some extra ones so I can have a nice, clean, unscratched watch for daily wear and one that is a little beat up for when I need to do outdoor work. This bracelet has the features of bracelets that are on watches that cost thousands of $ but is extremely affordable. I’m very happy with them.

Miltat makes a real nice bracelet and value for quality is outstanding. The brushed steel is nice and the bracelet feels heavy when wearing. This is a great affordable replacement for my SKX009 rubber strap. The solid end links fit well and was easy to install with the included spring bars. All but 1 screw was perfect. It was forced so the slot head was slightly deformed. I removed that link to fit my wrist, so the deformed screw will not be an issue. I would have awarded 5 Stars, even with 1 deformed screw, but I had to remove 2 Stars because of other issues. 1 Star removed... Inside my Amazon shipping carton, the bracelet, was encased in bubble wrap, but the wrap had a cut slit and was already torn open. Strange it was torn open. Inside the bubble wrap was a camouflage pattern Miltat bag with the bracelet inside. It was loose inside the this bag. 1 Star removed due to scratched bracelet. Normally, the bracelet should come with a thin tape across all the links to keep them from folding over and rubbing on the other links. It's supposed to be there. My bracelet had some scratches due to the protective clear tape missing. Some remnants of the clear tape were on the clasp only. Weird it would be shipped to me this way. I know that I will scratch the bracelet with normal wear, so I decided to keep it as is. This was my experience.

Great quality, heavy as hell, and fit well with my SKX007, love to feel its weight on my wrist! Only one thing, the edge (inner side) of the end link a bit sharp, but I can not feel it wearing the watch. Looks great, feels great, absolutely worth the price!

Tutto perfetto! Spedizione veloce, imballato a dovere con pellicole protettive ovunque e gommini per proteggere i finali. La qualità del prodotto è eccelsa: difficile trovare un bracciale in acciaio inox con maglie piene, finali pieni (che aderiscono in maniera PERFETTA alla cassa), clasp dal pieno, perni a vite a quel prezzo! Consigliatissimo!!

Great quality , looks awesome on my Seiko SKX007 and fits really well. This band transformed my old diver to look like a new watch.

Me ha gustado. Es de un acabado muy trabajado. Máxima calidad del producto. Muy buen embalaje.

Ce bracelet est assez massif visuellement, car la largeur de 22mm est constante. Mais le rendu est bon, avec une impression de solidité qui va assez bien avec cette montre de plongée. Le rapport qualité prix est bon. La boucle déployante possède est massive et semble très résistante. Un petit bémol: le poids, assez conséquent, mais restant raisonnable. Je suis très satisfait de cet achat.