Plasti DipRed Matte Spray 11 oz for Automotive Enthusiasts – Peelable, Durable Spray Rubber Tool Coating – Non-Slip Plasti Dip – Helps Protect Items Against Moisture, Acids, & Abrasion – (1 pack)

This stuff is amazing! The more I use it, the more I'm convinced this stuff is ALIEN technology! This stuff had to come from area 51. Seriously! Rubber spray paint that you can peel off! You can put this stuff down wet and it will dry to a smooth matte finish. You want stripes, no problem, mask them off and peel the tape while still wet, crisp, clean line almost every time! You want a little shine to it? hit it with the glossifier, not super slick but semi gloss easy. Change your mind? Peel that s*** off and do it again! At around $6 a can, who cares!Seriously, this stuff is really cool and applications is easy and really forgiving. Spray paint is too easy to screw up, prep is everything with lacquers and enamels. You spray one of those wrong and you've go a messy cleanup to get back to ready. This stuff doesn't even need scuffing, just degrease and spray. the glossier the surface the better. It peels way better off of glossy surfaces but the stuff is very tuff! You have to WANT to peel it off! A little more time with the alien ship should give them the formula for high gloss and we will be set! A monkey could paint with this stuff! He might have trouble laying out stripes but come on he is a monkey! I learned from another monkey to always wear respiratory gear when working in tight spaces cause your stripes might be a little crooked and squirrely if you dont!.Allow 30 minutes to recoat and have fun! This stuff aint expensive or permanent.Got a car, got a bike? Dip'em, dip'em hard and dip 'em wet! Hell they sell the stuff in gallons, imma gonna dip my houseboat! And at the same time stop leaks! Hell I might even try to dip my pool, water tight and algae free.It's perfectly safe on your new ride as well, paint a clear nose protector to protect from rock chips!Hell, dip that ride and rob a bank! Cruise a few mile away and peel that s***! That is a joke of course, you steal a car to robe a bank then drive to you dipped car and the peel it elsewhere! Like in the cannonball run!I would never do any of that s*** but I did plasti dip my bike and it looks awesome!! On a serious note to Performix. bribe that ALIEN and get the gloss formula! Iv'e got many plans for this stuff! Oh, sorry --- Blah, Blah, Blah, good stuff, buy it!

Easy to use and works great.If you have never spray painted anything before, you're best off practicing painting the box these come in with some cheap spray paint to get a feel for the process. Keep doing it until you can coat the box without any drips or waves.I took my wheels off and used a jack stand to hold my car. The whole process took about a day per tire so plan ahead. I sprayed my wheels with a hose then scrubbed them with dish soap water and a rag. Then dried with a broken hairdryer and a clean rag on a nice breezy sunny day(s). I buffed the wheel one last time with another clean rag. There is always some film of road grease somewhere so be thorough.Be prepared with cheap plastic gloves, some painters tape, a sheet of cardboard big enough to lay the tire on, and some cardstock or index cards. You may want a respirator or at least a fan or something too if you have no breeze. The paint makes fumes. 2 hours of prep work will save you 5 hours of backtracking if you mess up later. Take your time.I first taped index cards around the tire but later found this to be overkill. I am adept at painting and later only needed a single line of painters tape around the tire to sufficiently block the spray. The cans spray well and are easy to control. Prep to your level of comfort.I applied a single coat of gray Rustoleum metal primer next. This may not be necessary but it didn't hurt.Now, the cans of black will spray in a vertical line which helps immensely with coverage and control. Put on your gloves and paint the box lightly to get practice with it. The spraying handle is necessary if you want to keep feeling in your hands. Give the wheel about 50% coverage with quick light sprays and let it sit for a while. I gave mine about 20 minutes. Then keep repeating until your wheel is covered. At some point you can just spray it on fairly thick so long as you keep control of the coverage and it will work and look fine. Apply even layers until your whole can runs out and give at least 10 minutes between layers. You get a lot of paint in each can!Repeat the process with the gloss if you wish.Out of curiosity I painted an old wheel to see how this stuff holds up. I peeled it off after it dried. It is not unlike a latex glove but much, much stronger. It sticks to the surface well and took effort to pull off. I could remove all of it after some work.Overall this product is fantastic. Just do your prep work and take your time for the best results. The paint is forgiving and will nearly level itself out but you should still apply it as best as you can.

Used it to Black out some emblems on my Sequoia works great!

Works well if instructions are thoroughly followed