Powerwasher 80004 Large Surface Pressure Washer Scrubber Kit, Works with Most Electric Pressure Washers

I went ahead and bought this despite some misgivings from the other reviews but the unit I received worked perfectly. I used it with my electric Husky 1650 to power wash the patio and I was pleased with how well it performed. I used to use the standard spray nozzle which came with my Husky but it took an entire Saturday afternoon to do my patio which isn't very large but with this surface scrubber I was able to get the job done in a couple of hours.I rate it as a 4 star product because it worked as advertised but it is entirely made of plastic and I have doubts as to how long this thing will last before it breaks. If it should break I don't know if replacement parts are available for it. It came with a single sheet of instructions with the website power-washer.us listed at the bottom. However that website makes no mention of this product so I assume that if it breaks I'm going to have to buy a new one.With that said I only power wash my patio once per year so hopefully I'll get a lot of uses out of it. If you need a large surface cleaner for more rigorous work I suggest looking for something else.

Worked OK for a couple of minutes, then the rotating nozzles stopped rotating. Disassembled, cleaned and lubricated them, but again it works for a few minutes then stopped. Even when it works, the thing wants to tip over rather than glide over the surface you are cleaning.

This surface scrubber is just what I needed. I run a restaurant, a busy resturant and my floors get very dirty very fast. I have purchased one of thoes electric floor scrubber/buffers, but was never happy with the results and it would take me about 2 1/2 to 3 hours to clean my dinning room.I read the reviews on this and figured give it a try, when it arrived I took the adapter that fit my little 1500psi electric washer and gave it a try. To my amazement, and that of my staff it worked fantastic. with the help of two employees we cleand the floors in the dinning room and bathrooms in under an hour. One running the pressure washer and two to squeege out the water. If you have a need for this, then I say give it a shot. IT IS MADE FOR ELECTRIC PRESSURE WASHER UP TO 2000psi. So dont buy and hook up to your 2600psi gas rig thinking it will work, you will just break it. I wish I could upload a photo.

I have a large wooden deck surface that needs regular cleaning due to algae buildup that makes the surface slick. It is a very time consuming process and I had hoped this would make it a little quicker. Unfortunately, this is made for light pressure washing only. I attached this to a 1750 psi electric pressure washer to help with cleaning algae off a dock and it performed miserably. It consist of 2 spinning heads within the body that split the available psi of your pressure washer (I assume in half?). As such it was not enough pressure to really power clean. Additionally, since the "handle" is made of plastic, you cannot push it with any force without fear of breaking, which seems to negate any positive additional scrubbing impact you could get from the bristles located on the bottom of the washer.I assume this is good for cleaning lightly soiled solid surfaces where the force of the water allows the cleaning body to "float". On a dock with gaps in decking this does not work. I went back to using the regular wand which proved (unfortunately) faster. I wish it worked better, it just didn't. On the plus side, it was easy to hook up to my Husky 1750 pressure washer.

It's for an electric power washer so in the end you're better off getting a gas powerwasher if you want your driveway really clean. It removed mold from my deck sufficiently after multiple passes but left some lines of dirt on the driveway so... meh.

We use this with a 1700 psi Craftsman electric pressure washer on a latex deck surface and it has saved a lot of time. It is great for a quick cleaning but for deep cleaning, edges, and corners, we still need to use the pressure wand without the surface scrubber attachment.

After two minutes of use, the arm stopped rotating. I dismanteld the rotating joint and cleaned off the debris that had accumulated under the plastic washers. I made a plastic cover from a coffee can lid to shield the rotating joint. Again, the arm rotated for about two minutes.One of the nozzles also stopped spraying water. I carefully unscrewed the nozzle and cleaned it with a blast of air. After reinstalling the nozzle, it now leaks around the side of the nozzle/spray arm hole.

This product was great. I cannot stress enough what a joy it is to do a job with the proper tools at hand. I used my pressure washer to clean our composite deck last year and it took me several days to get it all done with just the high pressure nozzle. This year, I had the whole thing done in one short afternoon. I'm very pleased with my purchase and I almost can't wait until the next time the deck needs washed!