Peerless Wall Mount 40 - 80 Inches, Black Thin

Great mount that is easy to setup, super stable, and as thin or thinner than anything else out there!

This is a very good device. It is easy to put up and attach to the TV and once it is hanging on the wall you can lean the TV out to move it from left and right. This mount puts the TV right on the wall. (3/16in) so it is truly a flush mount system. Any cords or plugs must be flush behind the TV or it will not mount properly.

this product is good, very thin but it should not be purchased for tvs smaller than 46 inches in size.

This mount worked exactly as advertised and is compatible with my Samsung 65" KS8000. Installing the mount on the wall and rear of the TV is easy and takes about a half hour. Note that for the KS8000 specifically you will need to also order additional mounting screws (M8 x 45mm). The mount includes several M8 sizes for various TV's but the KS8000's curved rear requires special spacers (Samsung provides in the KS8000 box) and it requires the 45mm length to work properly with this mount. Instructions are fairly basic but simply double check all measurements and you'll have a beautiful wall-mounted TV in no time.

Really nice simple, slim, clean mount. Comes with a bunch of different screws and washers to fit almost any application. I used this on a Samsung LED LCD tv 55inch with no problems. I would recommend using the spacers that come with it to create air circulation between the back of the tv and the wall. You don't want to overheat your precious tv! Also has Velcro to lock in your tv from shifting around but it can be a pain to unvelcro it so make sure you set the tv where you want the first time around. Trust me! Access to the back of the the tv is really simple just lift the bottom up and there you go. I would recommend this product for a slim tv and a slim looking mount about a half inch from the wall maybe less.

Peerless wall mounts ALWAYS out perform any other wall mount I've ever seen or used. They always get the TV closest to the wall, if even an articulating wall mount. Peerless' finish and craftsmanship are well above the other brands also. Such smooth, effortless operation and design.This wall mount states of 0.33" inches off the wall...realistically, it's more like 0.7" off the wall. You have to take into consideration the mode chosen to mount the arms to the back of the TV. The spacers required for the Samsung UN60ES7500 that I installed, cause the TV to sit just that much more away from the wall. But really, I dare you to spend any amount of money on another product that will get your TV closer.LOVE THIS MOUNT! LOVER OF PEERLESS!

This was bought for my new 60" Samsung LED TV.Sits so close to the wall I needed to use the 1/2" washer included so my TV will have some ventilation from the back.PROS:- Sturdy, and sits VERY close to the wall (0.33 inch without washer)- Reasonable price (well it is 2 pieces of steel after all ...)- The wall plate is wide (about 35") which means that with a 400 X 600 mm VESA system (600 mm is around 24") it gives you 4-5 inches of freedom to shift the TV to the right or to the left.Another great feature is the holes on the wall plate: there are 3 (pairs) of them, and they are 16" inch apart which allow mounting on 3 studs. For some reason the middle hole does not show in the picture.But you can see the exact features and manual on peerless website:[...]CONS: none.This mount does not allow any alignment once it is setup, so you need to get it right the first time.What I did is drilled a hole for the middle wall-plate hole, then screwed the wall plate to the wall nice and tight, but not to tight. Only then I placed a level on the mount, adjusted it, and drilled the rest of the holes.I am very happy with this mount.

I purchased an 80 Vizio from Costco and wanted to make sure I put the TV as close to the wall as possible. I was concerned this might not handle the weight, but it has been up for 7 months with no issue. I did purchase a recessed plug and wire kit for flat panel tv's to hide the wires behind the tv and snake them down the wall. The way the mount landed on my wall and it only caught two studs on one side of the mount, so I added a Toggler anchor into the drywall to make sure the mount was absolutely flush against the wall.