The Clear Vue Cyclones Mini CV06 is a cyclonic pre-separator for shop vacuum systems. The inlet size receives a 2" vacuum hose – (adapters to other shop vacuum sizes sold separately). With the benefit of extended filter life and uncompromised airflow, the Mini CV06 is a great accessory for any shop vacuum!The Mini CV06 is a scaled version of the Bill Pentz Cyclone design that minimizes dustbin emptying and addresses the need to constantly clean and replace expensive fine filters. Traditional woodworking “cyclones” separate most of the heavy chips reducing the frequency of emptying dustbins, but traditional “cyclones” pass nearly 100% of the fine airborne particles that coats, clogs and ruins fine filters. Airborne wood dust has razor sharp edges and points that rapidly destroy filters. Traditional “cyclone” designs require constant cleaning and/or replacing expensive filters to maintain good airflow. Unlike other “cyclones”, the Mini CV06 separates heavier particles and most fine airborne dust particles. Separation of airborne dust is six times better than competing models. Independent medical school testing recorded separation rates at 99.9% of dust particles larger than 5-microns and 80% of fine dust particles sized to 0.5-microns. So little dust gets into the shop vacuum resulting in less filter cleaning or need for replacement filters. Continuous full airflow is uncompromised. The Mini CV06 is a great addition to any workshop. Used in conjunction with a shop vacuum, it is ideal for hand tool workstations and general dust clean up.Clear Vue Cyclones was founded in 2004 as a family owned business in South Carolina. Our commitment is to provide state of the art dust collection systems and accessories, wholly manufactured in the USA.
| Manufacturer | Clear Vue Cyclones |
| Part Number | CV06 |
| Item Weight | 13 pounds |
| Package Dimensions | 21 x 16 x 14 inches |
| Material | Plastic |
| Item Package Quantity | 1 |
| Hose Length | 5 Feet |
| Included Components | Mini CV06 body/cone, 5-gallon collection bucket and 5 feet of vacuum hose |
| Batteries Required? | No |
C**.
Wow don't have to keep emptying the shop vac now!!
I was a little hesitant about getting this. But I needed something so my shop vac would last a little bit longer. I got A CNC and needed something to help with collecting wood chips. I watched a few videos on youtube and didn't want to spend a hole paycheck to accomplish what I needed. I went for it and bought the CV06. WOW, this thing does the job. Every since I hooked it up I have not had a single item sucked up into the shop vac (wood chips, dust from MDF, you name it). I do wish the bucket was a little bit bigger but it works flawlessly. The lid snaps onto the bucket for a tight seal. Very easy to assemble and the material looks like it will last some time. Well worth the money spent.
A**.
Affordable dust collection
The item is easy to set up and effective at collecting wood dust. The longer neck prevents smaller dust particles from rising back to the outlet.
K**N
Works very well.
Outstanding dust collection but it does need a 5hp vacuum to be effective.
M**H
Works great
Works great...made a handy cart to hold it, the vacuum and tools on top
H**S
EXCELLENT!!!
I've been using an imported cyclone as a chip separator for my shop vac for a couple of years. It collected about 80% of the chips, sawdust, and sanding dust that I generated in my wood shop, but seemed to constrict air flow to my Fein Turbo1 vacuum. Today I replaced it with a CV06 system. Noting the volume of dust, etc. that swirled in the CV06 cyclone after today's shop work, I expect its separation effectiveness to be at least as good as before. And the increase in air flow at the end of 15' of 2" hose was dramatic. My vacuum system is substantially more effective now. The CV05 was quite a bit more expensive than the imported item, but I consider it a bargain.
D**A
Worth the wait!
I have used other American plastic cyclones with great results. This one is no exception. After waiting two+ years for this model to be available; I am glad I added this model to my shop. Works as advertised, and doesn’t disappoint. It is connected to a Rigid vacuum that pulls 168 cfm.
Trustpilot
1 month ago
2 months ago
