ArmorSuit 6 Pack for Apple Watch 42mm (Series 3/2/1 Compatible) Screen Protector MilitaryShield HD Clear Film - Made in USA

When it comes down to finding the right protection for my watch, ArmorSuit MilitaryShield is my go to brand. Why? Not only are their screen protectors durable and reliable, they also offer some of the best protection for any type of device you have. For the Apple Watch in particular, their screen protector leaves your whole display covered from edge to edge. Their screen protector is designed so that every part of your watch gets the protection that it deserves. Wet application can be a tad bit tedious, but the results are definitely worth the time invested into it. Installing the screen protector on a watch that has curved edges could prove to be a little tricky. The key to applying the protector on perfectly is getting the flat surface to stick onto the watch first. Once that is done, I waited for about 15 minutes for the edges to get tacky. Once they are tacky, then I would press the edges down with my fingers. I remembered to spray my hands with solution before doing this, and found that it really helped in applying the screen protector successfully. I realized that using too much solution will not help the edges stick, so this was the best solution that worked for me. They recommend allowing the protector to dry overnight, which is exactly what I did. However, I was still extra careful with it the first couple of days just as an extra pre-caution because I didn’t want my newly installed protector to come off so easily. Afterwards my screen protector dried clear and it was almost like there was nothing on my watch! It is truly invisible. I am very grateful to have stumbled upon this product, and will continue to use this brand for any future protection I may need for my devices.

So a lot of reviews complain about the application process which can be a bit involved I agree so here is what I learned. Use a space heater to gently warm up the film while you use the rubber thing to smooth in place. I waved it in front of the heater for a couple of seconds after I got most of the liquid out. I stole the heater tip from a YouTube review. They used a hair dryer but I am not dexterous enough to hold a hair dryer and maneuver the watch. A review here said to watch pressing your nail into the film during the application process. This is a Pro-tip! I failed at this and have a small indent in my screen. I barely notice it but it is there. So once you get past the application process it’s great! There is a small gap around the perimeter of the watch. So it does not cover from edge to edge, which I am ok with. The gap hasn’t seemed to hinder the protection of my watch at all and I do bump and knock it a bunch. You can fill the ridge of the protector, but I have mine for several weeks and the edge hasn’t lifted or rolled yet. It’s perfectly clear so while looking at the watch I can barely notice it is there. I can however feel the difference. It’s not that smooth glass like finish that feels so nice. This is a replacement for a screen protector that had a bumper that 1. Had a gap. 2. There was a space between the bumper and the watch were dirt could get in and did and lastly broke within a few days of wear. Bottom line, the watch looks beautiful without the screen protector and while I may not scratch or damage the face of my watch without a protector I feel better knowing it is there. So I sacrifice a tiny bit of beauty for a large amount of protection. Like using a condom, doesn’t feel as good or look as nice but the protection is so worth the sacrifice! I will update if/when it fails.

Update: 7/25...so after repeated changing of cases the edges of the screen guard did come off a bit and gradually got some dust stuck on it. So i removed the case and placed the second screenguard in the package. I still like and now im using my watch case free. I will try another case which maybe stays a bit on the outside and doesn't push off the screen guard. We will see. If not, ill just stay caseless as it looms better that way anyway. But no issues with the screen guard surface tho, handles bumps and minor scratches like a champ but I'm pretty careful with the watch anyway. Still highly recommended and the best in the market! I recently bought an aluminum 42 mm apple watch and immediately saw videos showing how easily it can get scratched. I started looking for tempered glass optiona but because of the curves edges none of them gave full coverage. So i compromised on this one. But i gotta say, i am very happy with it so far. The order included two protectors, a squeegee, a microfiber cloth, and liquid spray for wet install and instruction pamhplets. The protectors are made to perfectly fit onto the watch and doesn't leave any spot uncovered on the screen including the edges. The installation is not difficult but you have to be sure to follow the instructions properly. It took me abt 15 mins. Watch the video tutorial in the link they provide. It is a wet installation and you should allow it some hours to sit after you place the protector so it stays put. You can't even tell that the protector is on the watch unless you pull the watch right upto your eyes which is great! If you install it properly you will NOT get any bubbles, and even if you do most will disappear in a few days. If they don't this protector is easily reinstallable with the fluid adhesive spray provided. DO FOLLOW THE INSTRUCTIONS TO THE LETTER! An important note for people using apple watch CASES, let the screen protector stay on for a few days before attempting to put cases on the watch. I read a lot of complaints from other buyers saying the case pulled out the screen protector. So I decided to wait some days after installing the protector before putting on the case. And the protector is holding up fine. I do take care a bit while pulling out the case, and on occasion it has slightly pushed the protector off but it is hardly noticeable and easily stays on after pushing it down. There are very few dust particles set on the edges but they are on the outside of the edges, not under the protector, so you can wipe them off easily. As far as scratching goes, i haven't had any scratches so far but I haven't really banged it or dropped as i am pretty careful with watches in anycase. There was a very minor scratch once and the self healing tech seemed to work fine and it has disappeared now. If any major scratches occur, i will update this review to see how the protector handles it. Overall, i am certain this is the best screen protector available for the apple watch right now. Unless they can build a tempered screen glass protector with full coverage that stays put around the edges, this is the BEST bet you have. So buy it now!

Really happy with these screen protectors, much better than the tempered glass ones we’ve used previously. Easy to fit if you’re patient and follow the instructions. Have lasted well so far (4 weeks). Feels good on the watch and is invisible.

fits like a charm..only if you follows the instructions.

Following the video, goes on easy and looks good when it’s on. The cover wraps the around the screen curve. Problem is that it started pealing at the corner after a few days. Ended up having to replace the first cover with the spare. The new cover lasted about a week, then it started peeling on the side (not the corner this time). I reapplied the spray liquid and then used a dryer to push the protector back into place. This worked for about another week. The cover then started lifting at both the corner and the side. Vendor was good, sent a replacement kit, but I would not recommend the product. Frustrating to have to reapply covers every week (my last cover lasted over a year, I replaced it because of a light scratch).

Great protection for my watch

Protects well initially... but despite following instructions to the T... corners NEVER stay on properly and after a few weeks are collecting all kinds of grime and dirt. Having to remove prematurely to protect watch from getting scratched.