Orbit Arizona Mist 10109W Misting Calcium Inhibitor Filter

In AZ we get water via Central AZ Project canals from the Colorado River and the by time it gets to Phoenix it has evaporated down to half water, half calcium - not much of an exaggeration. Hoses turn white and connections turn to stone. This replaced every 3 months stops that completely. A bit pricy but worth it only because it works.

I recently bought one filter (Orbit 10109W for Mist Calcium inhibitor) and I am exceptionally pleased with the outcome. I had to have work done on my pool and had to refill it with approximately 10,000 gallons. I found (Tucson water high in Calcium load) that the filter did exactly what I had hoped for. The calcium load was already reduced by my Pelican filtration system from 600ppm to 200ppm and it also lowered the TDS from 1800ppm to 600ppm which is also great.Because of this dramatic change for the better I added the same filter to my secondary ice maker (Uline) which should decrease the cleaning from every 6 months to 12 months. In addition, since I need to clean the external pool 4 cartridige tank at least 3 to 4 times a year using the old system but now will add another filter to the standard hose system to also decrease any additional Calcium being added when refilling the external pool cartridge tank. This may seem to be over indulgent but at this price it ultimately makes my life better since I have less concern of calcium issues with the management of the entire pool.Great product. I learned about this filter by exploring Amazon. Deelivery was fast and the placement of the filter for the outside hose was very simple. For the house secondary ice maker I had to get a buch of parts to adapt to a my valve and with help from Ace hardware I spent about $70 to adapt this filter into my inline water system for the ice maker. Easy to do and based on water usage for the ice maker I will not need to change this filter more than once a year.

We have very hard water here in Arizona and it’s not so nice to swim in (it also results in mineral buildup around the pool). I performed a drain and refill recently and thought I’d put one of these on the end of the hose when I refill the pool with the hope that it would reduce the calcium levels. After doing so, I had the calcium levels checked and they are about half what they’d normally be.Given the high flow rate of this filter, I wasn’t sure what to expect but am very pleased with the result.I know this is an unconventional use for this filter, but wanted to share as it might help others who have the same issue with hard water in their pools.Oh, this filter traps sediment, too. It captured quite a bit of it. Overall, I put 5000 gallons through a single filter. Not sure how much life it has left after that as is it isn’t rated by # of gallons.

I bought one of these last season to use with my missing system and it worked great. A few weeks ago I purchased a new one for this season. After hooking it up I attempted to run water through it for two minutes like they request. Nothing would flow through. For some reason it was completely clogged. Nothing I did freed up the water stream. I've since returned it for a replacement and we'll see how the replacement one works. I suspect this part one was an "old" one. I'll update this review after the replacement arrives.New replacement arrived today and it works perfectly. No idea what was initially wrong, but this one is exactly what I wanted and expected. I may have just received an "old" one initially. Yes, I would recommend this product.

I have bought these orbit filters a few times over the years. They do a great job keeping my misters free of debris and calcium buildup. They have lasted more then a year a times just depends on your water quality in your area. But they are cheap enough not to break the bank to replace them yearly. The hose threads are a prefect fit. You can use these on any thing from swamp coolers to gradens drip systems or misters, endless options.

I was draining and refilling my pool to reduce calcium hardness , my tap water is 180 ppm CH after the filter the calcium hardness from the tap was 180 ppm so it does nothing to reduce this # when filling your poolit may work for sediment and other contents but was a waste of money for me since I have a whole house sediment filter

Why did you pick this product vs others?:Works for us we have hard water Functionality:We have used this filter on our mister system for five years and have never replaced any nozzles I just ordered another one

I bought a misting system at the local feed store to cool my carport on hot days when I'm giving private obedience lessons, but we have really hard water in our community, and i knew the misters would clog with mineral deposits very quickly without a filter. This one was inexpensive and seems to be working well. The misting system has been a game-changer, as I no longer have to schedule my private lessons around the weather forecast.