DPP Titanium Rear Sight Dovetail Mount/Mounting Plate/Adapter Compatible with Glock Vortex Venom & Viper, Burris Fastfire, Docter

So my concern based on images from reviews was that the RDS would sit high, and the mount would not conform all that well to the slide, leaving a protrusion/lip that would annoy me whenever I felt or looked at it. As you can see from a couple of my photos, it almost does look like it sticks out past the edges of the slide. Apparently pictures make even Glocks look fat. A lot of that seems to be the angle photos are taken though. My last photo, taken almost directly from a side profile, you can see it's almost perfectly flush. Having now seen it in person, I'm very satisfied with the look and feel. Feels pretty much like a 1/3 cowitness would on a MOS.As far as quality, the tolerances are perfect. Almost as hard to mount the dovetail as the rear sight is to remove. Very tight fit, and feels more durable than the firearm itself. All in all, would recommend.

Warning. If you install this on a Glock 19, you must also purchase a shim if you’re using a Vortex Venom. The elevation wouldn’t adjust low enough and after calling Vortex they informed me about the shim in combination with this part. This already makes it higher than I liked, so I returned the Vortex and removed this from my slide and tossed it in the trash. I replaced it with tritium sights which I like 100% better. The only reason I gave this two stars is because it didn’t mess up my slide when I removed it. I was worried about it scratching the top, but thankfully it didn’t and I’m only out the $20 I wasted on this part. They should modify it so it works stock with a g19 and the Vortex Venom.

Great product! I had this on my Glock 43 and mounted a Vortex Viper. It was easy to install and held very well. I think it works fine for concealed carry. After 6 weeks I checked it for looseness and took it off to see if it was rubbing my slide at all (it’s Cerakoted) and it had not rubbed any off or damaged the slide at all. On the small G43 it sticks out and I think this mount is better suited for the double stack Glocks. I added pics but the review got denied.

I bought the aluminum black alloy one so I'm not sure on that titanium but this thing dented pretty bad when trying to install. I tried the half way rule by hand and used a brass punch to get it the rest of the way. By the time I got most of the way it was dinged up really bad and would not seat the RMR correctly. What's the point of the set screws if it fits on this tight. It looks like the older version was easier to install and has more play. I scratched my slide removing it off. Overall definitely disappointed, especially with the scratch on my 19x.

This base plate worked perfectly with my Glock 19, 9mm. I was a little skeptical about fitment but the plate installed nicely. With a sight pusher to installation of the Burris Fastfire III, it took less than ten minutes total. I am VERY pleased with this product and highly recommend it to anyone considering. I am not being paid for a review and received no discount. This is just my opinion on this product and how easy installation was. Shipping was as expected, it was packaged well, comes with a variety of screws already with Loctite which was convenient- thank you for that. It comes with Allen wrenches and a nice little plastic box for storage. I couldn’t be happier.

Mounted on Canik TP9SFL, had to take off some material from the dovetail with a triangle file to make it fit. Fit is tight and sturdy, used it with Vortex Venom, sight fit properly and tight.If you are not afraid to modify the breaker a bit - get it, one piece design is the way to go.

The plate is great it matched up on my aborted Venom perfectly. Now the install was another thing. I took out my rear site then started pushing this plate in and all was going well till about a little past half way then it stopped. Now maybe this would’ve been easy had I bought the site pulled tool, but I didn’t want to spend the extra $60 for a tool I’ll use once. So after a lot of persuading and a few colorful words, I got it on and I feel confident that bad boy ain’t coming off or moving so that’s a plus.

I have two of these. I highly recommend them.Pros: One piece design. Secure fit in the dovetail of Glocks. Comes with 3 sets of screws and wrenches.Cons: None.The screws in the kit were 2mm too short for an ADE RD3-009. I picked up some M3-0.5 x 8mm screws at Home Depot. These are a perfect flush fit with the RD3-009 and the bottom of the adapter. The screws in the kit are the correct length for an ADE RD3-006.Relatively easy to install with a sight pusher. The U-shaped block on my VISM NCStar sight pusher is too narrow to accommodate this (and most other) adapter. I found a workaround. I put one of the set screws included with the kit into the hole above the dovetail. I left about 2 threads sticking up. By carefully adjusting the sight pusher, you can push against the screw stub to move the adapter into place.