How to set the Control button of remote controller for certain socket? 1. Install the provided battery of the remote controller. 2. Plug the receiver in a power plug, then LED will light, and LED flashes one time per second. 3. Press the ON switch (lasting 2 seconds) of your choice on the remote control. The receiver will then learn the code. When LED flashes continuously in 2 seconds and go out, it means the receiver learns the code successfully. 4. Repeat these last two operations for all receivers selecting a different ON button for each socket. 5. When power cut or pull out the socket from a power plug, you should repeat all the setting above. Features: -Allow you to switch off your electrical appliances by touch a button remotely about 15 Meters. -Saves energy and money not leaving appliances on standby: Energy Saving Trust recommended -2900W rated/Max -No interference to other socket in the set or other remote controlled devide. Each button control certain socket -Simple operation and simple outlook design -Used indoor Specification: -Voltage: 110V AC 50Hz -Rating: 110V AC /1800W Max -Learning code: More than 1 million -Remote Frequency: 433.92MHz -Remote Range: 15 Meters/49 feet in open area -Code Setting: Learning -ON/OFF Indicate: LED -Battery Type: L1028*1 (12V DC Alkaline, Included) Package: 1 x Remote Controller 4x US Plug Socket 1 x L1028 Battery 1 x Manual
Trustpilot
1 day ago
2 weeks ago
