SUNLU PLA Plus 3D Printer Filament, PLA+ Filament 1.75mm, Improved Strength, Compatible with FDM 3D Printer, Dimensional Accuracy +/- 0.03mm, 1kg Spool (2.2LBS), White

Needed a skin colour PLA for Mickey mouse face and it was perfect 👌 printed lovely on my Bambu Lab X1 Carbon. Super smooth finish and no stringy at all during lots of colour changes from the AMS. Highly recommended and will use sunlu more in the future. Also the sunlu spools are the same as bambu lab so compatible for perfect drying using bambulab printer drying functions.*NOTE - Filament looks very pink before printing but comes out perfect skin colour.

I was unsure about the colour (beige/skin) when it arrived, on the spool it looked quite pink. However, when printed it's perfect! For your typical white-skin model, the colour is excellent. Not too pale, not too pink. I got the filament specifically for this Sonic model, and I think it turned out well.The filament worked great out of the box with standard PLA settings, nothing special was required. The filament behaved well with no printing difficulties like warping, stringing, etc.The only drawback is the spool's centre diameter is huge, making it largely incompatible with the Bambu AMS lite without an adapter ring. I've not yet tried in a standard AMS. The spool dimensions are approximately:Outer diameter: 195mmInner bore diameter: 75mmWidth: 58mmMaterial: Plastic

Up date!!!!I have had the spool in my dryer for a while now and have re tried the filament, printing with it seems to have improved. Could be my dryer is faulty. Sorry for a miss leading reviewI tend to use Sunlu pla plus for my prints but this last batch had been terrible, I was trying to get some end of year gifts printed for teachers so had a deadline to meet, time after time print would fail and various stages, only when using the batch, I thought might be moisture in the filament so went out and brought a dryer, still no improvement to the situation,So unfortunately I missed deadlines for the required prints and also out of pocket fro a dryer that was not needed

The media could not be loaded. I've bought quite a few filament rolls from Sunlu now. (Listed below)Review is based on video attached.Note: The black and white filament are different brands. (White is ESUN AB white and also give really nice prints)Printer: FLSUN SR, Temp: 220 deg, Speed: 150mm/s (Slowed to 90% for first layers, increased to approx 120% for some prints with no issues)Gold Pla+ : (£15) My favourite, beautiful matte gold colour, details are great despite printing at high speeds as shown in the video. I've printed the boxes and left the printer alone, had no filament nots or clogs.Red,blue,green PlA+ : (£35) These come exactly as expected and also print well. The green is very green almost neon. Red and Blue as as expected.Purple, Fuchsia, Coffee PLA+: (£35)Purple and Fuchsia are as exactly like the image. However the "Coffee" is a a light brown and is listed as brown on the packaging. I was thinking of buying brown anyways so I'll take it considering the price.Grass green, Grey Blue, Silver PLA+ : £35The silver is the only colour that looks like the image or is as expected.The other two are much darker than the image. However they are still nice looking colours and I'm not in need of very specific colours just looking to extend the variety of filament colours.Overall, I'm pleased with sunlu, however I'd much rather the images were exact of colour. I guess you get what you pay for. Adding more bundles with varying colours would be great!The print quality is very good, adhesion is great and no warping although I use Bed Weld to ensure no issues.I print at a high temperature due to printing high speeds (sometimes reaching 200/300 mm/s) and the filament handles it well. As long as first layers are printed somewhat slow.Esun is a good brand but purely due to the competitive pricing I stick to Sunlu.Also if your curious the boxes I'm printing are: Twist Lock Boxes from 3D printing (you can find on Thingyverse)

Works great with the bambu labs pla basic profile. Very little stinging.

At first, I had a lot of trouble with adhesion with the Sunlu Filaments on my Ender 3 with the glass bed, and also in a Flashforge with the PEI bed, but they's print just fine on the blue surface in the Flashforge.A bit of research revealed that the coating on the glass bed, and the PEI need to be toasty hot to activate the stickiness, and they loosen when they cool. Also, I was using the included Flashforge calibration card. I remembered seeing something about using A4 paper to do this, so I grabbed the nearest piece of A4 and set up the Z axis with that. It happened to be one of those extra thin sheets the NHS send their doctors letters out on.Instant result. the build plate adhesion issue was solved and nothing even tries to curl at the edges now. I print on the glass bed at 75 degrees for the first layer and let it cool to 60 after that. this results in excellent adhesion and the cooler bed prevents upper layers from pulling the print up, while the initial temperature ensures the first layer has enough time to adhere before it cools. Also, be patient with thin flat prints, let the bed cool down completely with the print held in place before you loosen it, this will prevent warping. It's the same story with a PEI bed. At first I took the PEI bed out of the printer when down and set it aside to cool quickly. I actually heard the print crack and warp as it cooled too fast!So far, I've used 15 Different SUNLU filaments, Silk, PLA+ and PLA, all have been great and printed perfectly when using the recommended settings (and a nice tight Z clearance) strength is great on all, and no issues with bridging. The only jams I've experienced were on the horrible quality Flashforge, which got sent back, no issues yet with the Creality.PLA+ needs the extra temperature but is a more consistent print with greater strength for it.

lovely print, smooth and clean lines

Otrzymałem stara wersje filamentu. Nie ta która jest na zdjęciach.

Le filament SUNLU n'est plus à présenter pour les plus aguerris dans l'impression 3D. Un peu plus cher que la concurrence mais niveau qualité, il n'y a pas à dire, c'est du bon. Les bobines sont bien enroulés, les couleurs sont fidèles aux images de la fiche de description.J'ai voulu testé cette couleur chair pour certains futurs projets. Ayant procédé à quelques tests pour voir le rendu, je n'en suis pas déçu du tout.Je recommande vivement la marque !

El PLA Plus 3D Filamento para Impresora, de 1.75 mm, ha sido una excelente adición a mi colección de materiales de impresión 3D. Este filamento, conocido por su durabilidad y rendimiento superior, ha superado mis expectativas en términos de calidad y facilidad de uso.El PLA Plus se distingue por su dureza mejorada en comparación con el PLA estándar. La mayor resistencia y rigidez hacen que sea ideal para proyectos que requieren una mayor durabilidad y resistencia a impactos. Este filamento mantiene una alta calidad en cada impresión, lo que garantiza resultados consistentes y fiables.La impresión con este filamento es sencilla y sin problemas. La extrusión es suave, con una buena adherencia entre capas y una excelente fluidez, lo que facilita la obtención de impresiones detalladas y limpias. El filamento se comporta bien con diversas configuraciones de impresoras 3D, proporcionando una experiencia de impresión sin complicaciones.El filamento de 1.75 mm ofrece una precisión dimensional muy buena. La uniformidad en el diámetro asegura una alimentación constante y sin obstrucciones, lo que resulta en impresiones precisas y con los detalles correctos. Las piezas impresas tienen una calidad superior y presentan menos problemas de deformación.Este PLA Plus es versátil y adecuado para una variedad de aplicaciones, desde prototipos funcionales hasta piezas decorativas. Su resistencia mejorada lo convierte en una excelente opción para piezas que estarán sujetas a uso o desgaste. La capacidad de imprimir con una alta calidad y durabilidad lo hace ideal para proyectos que requieren un material más robusto.El filamento llega bien empaquetado en un carrete que está diseñado para evitar enredos. La calidad del embalaje asegura que el filamento se mantenga en excelentes condiciones hasta su uso. El carrete es fácil de manejar y almacenar, y la cantidad es suficiente para varios proyectos.El PLA Plus 3D Filamento para Impresora de 1.75 mm es una opción destacada para quienes buscan un filamento con una mayor resistencia y durabilidad. Su facilidad de impresión, precisión dimensional y versatilidad lo convierten en una compra altamente recomendada. ¡Una excelente inversión para obtener impresiones de alta calidad y duraderas!

Als begeisterter 3D-Druck-Enthusiast habe ich kürzlich das Filament von Sunlu in den Farben Neonpink, Neongelb und Hellblau ausprobiert. Hier sind meine Eindrücke:Farben und Druckqualität:Das Neonpink strahlt förmlich auf dem Druckbett und behält seine lebendige Farbe auch nach dem Druck bei. Es ist perfekt für Projekte, die auffallen sollen. Das Neongelb ist ebenso lebendig und druckt sehr gleichmäßig, ohne dass die Farbe verblasst oder unregelmäßig wird. Das Hellblau ist eine sanfte, beruhigende Farbe, die in meinen Drucken eine schöne, klare Definition zeigt.Druckeigenschaften:Alle drei Farben haben eine gleichmäßige Filamentdicke und verursachen keine Verstopfungen oder Probleme mit der Extrusion. Die Haftung auf dem Druckbett ist ausgezeichnet, und ich konnte komplexe Modelle ohne Verzug oder Ablösung drucken. Die empfohlenen Drucktemperaturen wurden gut eingehalten, was zu einer zuverlässigen Druckleistung führte.Materialqualität:Das Filament von Sunlu scheint von hoher Qualität zu sein, ohne unerwünschte Verunreinigungen oder Unregelmäßigkeiten. Die Spulen sind gut verpackt und geschützt, was zu einer problemlosen Handhabung während des Druckens führt.Fazit:Insgesamt bin ich sehr zufrieden mit dem Filament von Sunlu in den Farben Neonpink, Neongelb und Hellblau. Die lebendigen Farben und die zuverlässige Druckleistung machen es zu einer ausgezeichneten Wahl für 3D-Druckprojekte aller Art. Ich kann es jedem empfehlen, der hochwertige Ergebnisse sucht und gleichzeitig Wert auf Farbvielfalt legt.

Totaal geen problemen. Geprint op 205 graden met mijn Ender 5 Pro.