25pcs Conductor Compact Connectors Lever Wire Nut Electrical Connectors with Fixed Base for 3 Circuit Inline Splices 28-12 AWG

I initially purchased this lever wire nut because I had an application where a bracket to hold the wire nut was helpful. These did not disappoint. The bracket does solidly hold the lever wire nut in place.These lever wire nuts seem to be quality constructed and grab the conductor making a reliable connection. Once the lever is closed, wires cannot be removed (unless you release the lever). It grabs wires very solidly and makes a reliable connection. I would trust these lever wire nuts to join wires for long term service.The only CON for this product is that the levers are NOT color coded. If you read the description carefully, you'll see that these lever wire nuts are configured for TWO inline circuits. These lever wire nuts do NOT tie all four conductors together. Each of two inline circuits are tied together. Because all levers are orange, you might believe that you can connect 4 wires together as you might with tradtional wire nuts, but this is NOT true. What you have are two separate circuits inside this wire nut, so you could connect together a pair of two-wire cables.Other that this one CON, these are very good wire nuts that when deployed, should last FOREVER. I recommend this product.

Ive been using the old style wire twist connectors for many years until I found the Wagos and now thats all I use, but doing certain connections it becomes an issue when you need the wire to go continuously and these Lever connectors solve that problem, easy to use and the wires stay connected very tight.

I got this to splice jumper clamps on my battery charger which came with some weird ass connector that was a pain to put on and take off.Now I have normal, standard jumper cable clips to connect my charger.Very solid, meet all the local electrical codes, quick and easy. Just cut the wire, strip off 3/4 inch, insert and clamp down. Done. Not worried about stress or pulling out.I used one like this with 3 slots to add a new outlet to an existing line that only had a couple inches of play, so didn't have room or slack in the wire to use wire nuts to splice in a new wire.So cut original wire (one black, 1 white, 1 green).Need 3 of these splicers, each with 3 inserts.Inside an electrical box (I used a thin / flat one).One block for all the black wires: - Put original black wire source into slot 1 & clamp down. Put original other end of same black wire in 2nd slot and clamp down, add 3rd black wire for new outlet into 3rd slot and clamp down. Now all black wires are bound together. - Do same for all 3 white wires (all 3 in one three-slot junction box) - Do same for all 3 green / ground wires.Presto, instant new wire to run to new outlet I was installing in ceiling of porch for camera.

These actually work great for what they are designed for. They are way too bulky for any box work but if you're looking for simple inline connections, these are great. On top of that, I didn't break a single one on installation. Kinda costly for the limited application. It does pass code in my area as well. It's much faster than twist caps and much more secure.

These connectors are very good. If you are challenged by the twist connectors these are for you, no more having to mess with electrical tape. These connectors leave no wires exposed. Easy to connect wires. I'm a fan

Very handy for test bench. My fingers hurt a little because the levers are so tight but that is a good thing. Wires are very snug.Update: I didn’t know that the levers can be opened up completely and it latches open. My cool.

Whichever you choose you want go back with wire nuts these are so easy to use

Used these for different projects in the house. Had to pigtail in a power supply. Removed a defective switch in a plant grow light and used these.

easy to use