Aluminum Fascia Mount Terminal End Post with 13 Holes (Predrilled) 49 Inch Tall (Cut to Height) for Cable Deck Railing Fence Systems (Powder Coat Bronze)

Description

Color:Bronze *ALL POSTS ARE OVER SIZED AND MUST BE CUT DOWN ON JOB SITE The foundation of any cable rail system is where the cables begin and end. Our FASCIA MOUNT TERMINAL POST is engineered specifically to withstand the applied stress when each wire rope is tensioned. Each aluminum railing post is manufactured from 6063 T6 aluminum with reinforced walls. Avoid competitor hollow posts that are designed for glass infill. When the cables are tightened in these cable railings, the posts tend to deflect, so the installer must decrease cable tension to reduce the bending. Terminal posts come either pre-drilled with powder-coated holes which eliminates many hours of installation labor, or un-drilled which are used on stairs or ramps. Aluminum posts are designed for through post cable end fittings only. The FASCIA MOUNT TERMINAL POST mounts directly to the rim joist or fascia board by attachment hardware. Usually these are hex bolts (sold separately). SPECIFICATIONS Available for either 36" or 42" rail heights. 2-3/8" by 2-3/8" square 13 9mm predrilled holes (requiring 13 cable runs), for a total railing height of 42" above deck boards. 11 9mm predrilled holes (requiring 11 cable runs), for a total railing height of 36" above deck boards. Qty (2) mounting holes must be drilled. Can be cut down with a carbide tipped blade on a chop saw Aluminum systems are NOT recommended near salt water, check out our 316 Marine Grade Stainless Steel Systems, as they are more corrosion resistant. Verify with local building codes.