Mongoose Legion BMX Bike, Hi-Ten Steel Frame, 25x9T, 36x16T or 40x16T Gearing

The bike from the pictures looked pretty cool. I didn't realize how beautiful this bike would be until it came in the mail. I purchased the Legion Mag in orange for my 8 year old. It was great to see his reaction on Christmas when receiving this bike. He was so excited. I read some other reviews from reviewers who had complaints on the difficulty of assembling the bike and in my opinion the people having trouble assembling the bike must be blatantly ignorant or illiterate. The instructions for assembly are written so a teenager could assemble this bike, with clearly labeled diagrams and more in depth explanations than what is necessary for assembly. The instructions on assembly are excellent and I had almost no trouble assembling the bike without them until it came to adjusting the brakes. I assembled the entire bike without instructions except for the brakes because it is just self explanatory. I was also able to assemble the brakes without any trouble or needing the instructions although I did refer to them for proper adjustment and alignment protocols. The only issue I had when assembling the bike is when I got to the point of attaching the handlebars to the handlebar binder assembly attached to the stem. The four socket cap screws that tighten down on the handlebar binder bracket would not thread easily. I felt as though I would break the screws or destroy the threads if I attempted to tighten them down far enough to grip the handlebars. There was too much paint in the threaded holes and also the tolerances on the machining of the threads was not great. I have included some pictures showing just how much paint was removed from tapping and also chips from burs in the threaded holes from poor tolerance drilling and tapping at the factory. In order to fix this problem I grabbed a tap handle and a M8x1.25 normal thread tap and tapped the holes. I would give this bike a 4.9 out of 5 if I could just because I needed to tap these holes and a tap was not listed as a required tool. I don't think many people will have problems assembling the bike even if they have this issue and need to tap the four holes as these are the only holes that need anything to be screwed into. Honestly if you don't at the very least know how to use a tap and die set you probably shouldn't be assembling a bike as it's not safe to do so if you're not familiar with basic tools. You could wind up hurting your child from pure negligence if you don't know how to use basic hand tools to assemble this bike properly. My suggestion is that you take it to a local bike shop and pay $30-$40 to have them assemble the bike and adjust the brakes if you don't know what you are doing. I assume some people who buy this bike will do just that with the majority of people knowing how basic hand tools work and them being able to assemble it themselves. Overall the bike is amazing, my son loves it, it was extremely easy to assemble, and I recommend you tap the holes on the handlebar binder even if it doesn't need it as it will allow you to make a more secure connection. Please don't listen to people complaining about difficult assembly as it was extremely easy even the detangler brakes something of which I've never seen or dealt with on a bike before. The instructions are very clear on how to hook the brakes up and how to adjust them properly and I was actually surprised how easy it was to assemble the brakes because I was expecting something very difficult based on the reviews but it turns out these brakes are easier to assemble than normal brakes.

Great Bike for a beginner and a leap above Huffy and Walmart bikes. I remember Mongoose being a Good recognizable brand decades ago. This bike was easy to assemble. I think it took an hour to unbox and put together. Box was damaged heavily, but bike was packed so well with foam and wrapping that there wasn't a single scratch. The most important part is the kid is happily surprised and liked the color.

Great bike. And during shipping the chain Guard got broken, Pacific Cycle was awesome replacing it quick and friendly. A great shopping experience. Thanks guys

Love the bike. Bought 2 of them for my kids for Christmas. Put them together. it wasn't hard but i've been building bikes for like 20 years. my only gripe with these bikes is the brakes... or should i say, lack there of brakes. the brake pads just dont work worth a darn. i'm going to buy new pads to replace these garbage ones. overall, the kids love the bikes. they love the rims, but say they cant stop quick enough... i can pull both breaks super tight and still push the bike and the wheels turn... like, seriously bad breaks.

Mya nephew was very happy......

With all of the four and five star ratings, I must be the problem, right? The bike came partially dissembled for shipping purposes. I expected that. What I did not expect was: 1. Missing parts. One of the nuts and both of the washers were missing from the front wheel. Ok. A shipping problem. But what kind of washers do I need to go find? Should be simple. Just read the instructions. 2. Horrible Instructions: For example, to attach the front wheel, I need to follow the appropriate set of instructions depending if my bike's wheel is, "nutted with step retaining washer, nutted with clip retaining washer or quick release". But I don't know which one my bike is; the nut and both washers are missing. Every section is just like this; follow the set of instructions that pertain to your bike. But where does it say if the bike I purchased has a quill stem, a threadless stem, a front load stem or a top load stem? I have no idea. Mongoose has been around for a while. So there are plenty of videos on YouTube. But there are so many configurations for Mongoose bikes, good luck finding the right one. I watched a bunch of videos, went to Wal-Mart (twice) and got $30 worth of nuts, washers, hex drivers and, no I didn't go out and buy the lithium gel they recommended! Then I paid a bike shop $45 to put the thing together because I still couldn't figure it out. The bike shop wouldn't do the brakes because of liability purposes. But they showed me that I needed to loosen a nut and put the brake cable out some. Should be easy, except... 3. CHEAP parts!: I stripped a nut and two screws trying to tighten the brakes just enough to barely work. It's Christmas Eve and I'm soooo frustrated. Should I be worried? Every single step in the instruction book says that if I don't do this step correctly, someone could get seriously injured or killed. Here ya' go son. Have fun! Merry Christmas. I could call Mongoose Customer Support. They are open Monday through Friday 8 to 5; because that's when dads assemble bikes right? Sorry for all of the venting. I've had the bike for a week and I have to say, I have NEVER had this much trouble assembling something that came in a box. I've got $250 invested into a $170 bike and I don't feel safe letting my son ride it. I am not a happy customer.

I had no previous experience with this brand of bikes before this, but bought this and two others as Christmas gifts. Wow!! My kids love these bikes! Well made, easy to assemble, great value. The first day my kids were ready to ride several miles on these bikes. The thicker tires made it easy to go over multiple types of terrain. Everything is just really well made and put together. Super stoked about this purchase and the two others!

Bike is beautiful, my 8 year olds reaction was priceless. He has a little difficulty with the hand breaks which I adjusted up to make them easier to use. The pedals have little raised teeth for grip, not as sharp as other pedals but they have already made a few scratches on my young riders legs but we are only in his 2nd of riding without me holding the seat and he is still learning. Was deciding between the Legion Freestyle and the Walmart mongoose bike for $50 less and I’m so glad I went with the Legion Freestyle as I believe assembly would have been incredibly more difficult on the Mongoose bike sold at Walmart. Look forward to buying again for my 2 other kids as soon as they are ready.

Works perfectly fine. Make sure to measure yourself to know if you fit this size model. Bike looks nice and had no issues being put together. The break could be a little bit better but I can upgrade that later if it fails. No back pedal brake.

Bought for my 6 yr old son- he absolutely loves it and can ride it really well…is a bit heavy tho so not everyone

Very easy set up!. Must skip through some of the install instructions as the bike does not have front brakes for install. The bike has a back break only and does not come with front and back foot pegs, we used ours from my son's old bike. I am not sure if it mentions that in the description because to be honest I didn't read the whole description at purchase haha The bike arrived quickly without damage and is absolutely awesome and sturdy. My one reccomendation is the bike frame space at the back does not allow a hookup for kick stand... minor setback.

The box has terribly damage and some dents scratches in handle bar, but still Look Good

Kid loves it and top quality