Penom Case for Apple Watch Screen Protector Series 5 Series 4 44mm, Ultra Thin iWatch 44mm Screen Protector with Full Protection TPU Cover

Just recently purchased an Apple Watch and heard so many stories on them breaking over the simplest daily activity so I decided to go to amazon and find a case!This Penom case for Apple watches is exactly what I needed!! Other cases that wrap like this usually have really thick plastic over the screen. This case does cover the screen but it’s a thinner plastic than what protects the rest of the watch!I had a little difficulty putting on the case.. even after using the 1 2 step wipes it still had some dust in between. Now that may not bother others but it did for me so it took me a good bit to get how I’d like it. In the end I couldn’t get all the dust out but oh well.Pros:•Thin screen protector; making it easier to navigate compared to other cases•Doesn’t interfere with charging•Fully protects and wraps around all corners•Can’t even notice that it’s on while wearing the watchCons:•Dust can collect in between the screen and caseOverall, first impression leaves me @ 5 stars! I have no doubt this will protect my watch from daily use. I’ll come back to this review if anything changes and/or I’d like to add anything else.

I bought a similar case to this and have used them since I got my watch for Xmas. They were good, but I constantly had to take them off to clean the inside from either sweat, water, or dust. So I thought I would try this one based on the reviews. So far it has not wicked up any water/sweat and it seems to be more flush to the screen so no dust to clean up either (even after mowing several acres). It also is more streamline, so it doesn't' look like you have a protector on. All and all, I couldn't be happier with this protector. Will buy again if needed, hopefully they keep them in stock.Update- 3 months later. Protector still working better than the others like it. My issue is that the case is yellowing(see attachment). I did purchase another one because I like the protection of this case but not sure I will continue to purchase this type if they don’t fix yellowing problem. So I’m dropping my rating to a 4 star for this issue.

I was very indecisive on which protector to get from all the options on amazon, I researched and looked at reviews and after spending too much time on it, I decided that I would opt to go for this Penom case. All I wanted was something to protect my watch from any damages and/or scratches, that the touch sensitivity and crown would not be affected much, and that it won't look bulky to ruin the look of the watch. I do not care how much I spend on a case for it but much to my surprise, this case delivered on all my needs. Installation is easy and I actually love the look with the case. I'm glad I went with this option at such an affordable cost.Thanks!

So I got 2 of these because of the reviews and they looked a bit different than the usual all enclosing cases, I am always looking for something a little less bulky/thick a little thinner a little better looking! I love this case because its like wearing just the clear bumper, without a screen protector BUT it DOES protect the screen because it IS THERE, it is just sunken down a bit to make the watch appear like its only wearing the bumper! How cool is that? They have depressed the screen protector area and made it thinner than most cases to give you just the look of a bumper with the protection of a full case! Pretty cool right?? Give it a try!

I wasn't sure what to expect but this came as described including a wet and dry wipe, a polishing cloth and the casing. The casing was tough to remove from the plastic tray it came in. Had to pull up hard as it was stuck to the tray for some reason, however no markings resulted from all the bending and tugging to remove it from the tray. It fell easily back into shape. It was a little bit of a challenge to keep the watch screen and inside of the screen protector clean while installing. Took 3 tries but finally got it so it's clean and smudge free. It covers the watch perfectly and gives the sides and screen the protection it needs. No issues with sensitivity. Watch responds as if nothing is on the screen.

Just got my Apple Watch Series 4 and I wanted to protect it. So far this case seems very durable - but time will tell. I like that it doesn’t make the actual watch face so bulky, some other models seem to be this way. The photos below are shown on my 40mm watch! I feel better about being clumsy with my watch with this case on it. Only a few bucks could save you hundreds on a replacement screen!

This cover fits my series 4 44mm Apple Watch perfectly. Case is made of a silicone plastic that bends to slide the Watch into. I have had no issues with the cover over the screen. The touch sensitivity works great. The cover is thick and not paper thin for maximum protection. The only issue is water. Rather it is washing your hands or caught in the rain you will have to remove the cover to dry the water.

I read the reviews for this item prior to purchasing. There were many positive and a few negative. My review is based on my personal experience with this item. I found it very easy to install even though there are no actual instructions on how to install it. If you have already had a screen protector on your watch, you do what you did with that, use the wet wipe to clean the face and dry it with the dry wipe and put the screen protector on. Voila. I have had zero issues with the sensitivity of the touch screen with the cover as others have experienced. I like how the protector is recessed into the bumper and looks like there’s nothing there. The case protector isn’t bulky and protects the watch body well. Changing straps is easy and the case doesn’t interfere with that. Overall I am extremely pleased with this purchase.

Whilst it looked good, and fitted well, was protective and loved that there were two in the packet, when running, sweat / moisture got inside and had to remove to dry again, which was annoying. Also didn’t fit well enough - struggled to use the Apple Pay with the watch when it was on - couldn’t double-press the button. Watch fine without and with different case so can only assume it was something to do with this one. Ended replacing because annoying to not be able to use all functionality with it on.

Compared toMany of the protective case options on the market, this is the beat balance of protection while maintaining the appearing of the Watch.One star was taken away as this style can create moisture marks under the display if exposed to water or sweat, but this isn’t a deal breaker as it isn’t overly noticeable. If it really bothers you it can be cleaned and reused.

One of the reviews I read of this product said it came with great instructions with suggestions for how to have it not fog up. Yeah...nah. Nothing in the package at all except the case itself, which is bulky and pretty damned unattractive and a tiny moist towelette and dry towelette. No helpful diagrams. In order to get it on, you have to take the watch straps totally off and the wrestle with getting the plastic over the watch. Well, OK - but every single morning I need to repeat this procedure as the shower steams up the inside of the plastic case. I have already ordered a different product to try using to protect the watch face, as this is so cruddy.

I'm washing my hands often, and i get water between the protector and the screen at least twice a day.It's been happening so much that i had to stop wearing it as my watch is not usable while wet.The viewing angle on this is also not great as you can see the dots from the protector if you are not looking at 90degrees directly at the watch.

Conserve l’humidité +++Après un jogging beaucoup de condensation qui perdure jusqu’à 2 heures. À répétition, pas certaine que ce soir l’idéal pour une apple watch