FitDesk Universal Saddle Extender for FDX 2.0 & 3.0 - Adjustable Bike Seat Post Riser Adapter, Increases Saddle Height by 3.5 Inches, Steel Post Extension, Exercise Bicycle Seat Adapter

Worked on my Sunny Health indoor bike. Bought my(just like new), indoor bike off my buddy for $75 bucks about a year ago. Had been collecting dust in the garage till I decided to re-kick start my cardio recently. The stock seat my bike came with was uncomfortable and not designed for Spin type exercises, which I like. Didn't want to splurge on an indoor Spin Bike just yet, so I decided to buy this adaptor which fit my Sunny Health Bike perfectly. Yes, flat and lock washers included too. No issues. Took 15 minutes. 1(2 works best) small crescent wrench(s)(to remove the old seat and to tighten bike seat collar), Hex Key/Allen wrench(don't recall the size I used. But a cheap set from the 99 cent store would work). Looks and feels sturdy. Did raise the seat level up a bit but was able to adjust to a lower setting on the seat post. Great price and easy to assemble. No regrets. Hope this helps.

This product fit my Flexispot bike perfectly. It is exactly as pictured, well made (the post is solid steel bar, not tube), and will make your bike seat a lot higher. I am 5'8" and it was not a problem, but if you are a lot shorter, it could be an issue for you. If you are taller and want more seat height, this may be the trick for you! Not I have a seat I really like, a major upgrade!

Update: I had to reorder the adapter, hoping the whole product was in the box this time... and it WAS!! Thankfully. Got home, installed in just a few minutes. Works perfectly on my European stationary bike. Giving it a four because I received only partial product the first round and still waiting on refund. Before: Unable to install, as I only received the bike clamp. I ordered the all black saddle adapter. The product box arrived with a photo of an aluminum pole with a black base, w/ black clamp. Inside box, that was taped closed, was only the clamp. I had this shipped to an APO, took about 2 weeks to get here, I am a little discouraged.

This is a excellent part to convert your Exercycle seat to use a cycle seat and ad height and adjustability, strong part and easy to install well done.

I like the fact that I was able to cut this to make it look nice and a seat fit properly to my Life Fitness C3 upright. It is solid metal, but not hardened. I purchased a cheap electric cutting wheel from Harbor Friend and cut it in 5 minutes. This is well made and the fit is proper for a universal 3 hole mount.

Fits Schwann AD2 perfectly and holds a way more comfortable seat. However after a week of use the plate is bent and the weld holding the post on is cracked in half. At any time this weld could fail and cause serious injury. I’m 6’3” 220lbs, this should have a beefier weld and plate to be safe for the rider.

I took a chance because of the triangular mounting holes. I wrongly concluded that this would fit my Life Fitness Platinum Club Series upright bicycle. It does not. It would have been nice if the product description would have included the measurements and locations of the mounting holes. It did not. I will be returning this to Amazon. and finding a fabricator locally to custom make one for me. Too bad, I had high hopes.

Pictures make it seem like the height is adjustable but you have to find someone who cuts metal in order to get it cut and home depot/lowes all the common places you go for wood do NOT cut metal, at least not in my area. Called over 15 places before i found a small locally owned place who said they would cut it for me but they dont normally cut metal they dont personally sell.

I brought this to replace the saddle on my Roger Black Gold exercise bike. The Sadle on the bike is the worse and most uncomfortable saddle I’ve ever used. This adaptor fits the Three bolts in the bottom of the saddle and allows you to change to a saddle if you’re choice!

This is a long term review as we bought this May 2018 and have used it for a number of months. We have an old exercise bike that worked absolutely perfect but the old seat cracked and we needed to find a replacement. The manufacturer of our old exercise bike no longer exists and we've been unable to find a replacement so I decided to switch the old seat and bracket to something that is universal. After a few minutes of Amazon searching I came across this " Universal Saddle Adapter " so I decided to make the purchase and see if it would work out. Upon an easy install of this adapter I quickly put on our new seat, tightened things down and gave it a try. It worked absolutely perfect. It is made of heavy thick steel coated in a black paint and during our use of this it held up well with 30km - 60km rides per day. For a durable seat adapter this I'm sure will work well for you just as it had for us. Helpful, is how I hope you find my review

Alles bestens !

Me llegó muy rápido y ajusta perfecto a mi bicicleta estática en 5 minutos estaba instalado, el material se ve sólido y muy bien fabricado.

I use it for a regular bike seat on a Schwinn Airdyne2 exercise bike. It's perfect.