Keyless2Go Replacement for Keyless Entry Remote Car Key Fob for Select Honda Odyssey Vehicles That use OUCG8D-399H-A 72147-SHJ-A61, 6 Button

Need for an older Honda Odyssey. Was able to program following instructions I found online and it has been working good.

I got these to work (by "work", I mean they will lock or unlock the doors; none of the other features, like opening the sliding door, work for me ... but that's okay). The instructions direct you to a website, and if you follow the instructions you find on the website carefully, yes, you can program these yourself. If you can't get it to work, try having all the doors locked, or all unlocked, before you start trying to program the device.

Works perfectly

Works great here is How to connect to a Honda Odyssey 2010Have all remotes for the vehicle on hand. Make sure all the doors and rear hatch/trunk are closed during programming. Only need to use 1 remote to get into program mode but all remotes must be programmed during the same session. Each step must be completed within 5 seconds.1. Sit in the car with all doors/trunk tightly closed2. Turn the key to the ON position, marked by "II" on the ignition bezel so the dash lights come on, then within 5 seconds press the "Lock" button on the remote for 1 second or so and release the button.3. Turn the key to the OFF position, marked by "I" on the ignition bezel - dash lights go off.4. Repeat steps 2 & 3 three more times (A total of 4 times) – each step must be done within 5 seconds of the previous step.5. Upon the 4th turning of the key to "ON", press the lock button on one remote, the locks will make a cycling sound (clunk), locks will NOT lock or unlock at this point, they will just make a noise. The system is now in programming mode. Do not turn key off.6. Within 5 seconds of entering programming mode and within 5 seconds of each other, press the lock button ON EACH remote you are programming, for a second or so and release. This step needs to be completed within 10 seconds. Each time a remote button is pushed, the locks should cycle. Up to 3 remotes can be programmed.7. Turn ignition completely off and remove the key. Step out of car and close door. The remotes should be programmed and should work. If you have a trunk/hatch release, the button for this feature needs to be held for a few seconds before the trunk/hatch will "pop".

Not too complicated to set up. Only thing is the trunk opener didn't work but it works by unlocking the doors so....

I bought this for my 2005 Honda Odyssey Touring. I took it out of the box and followed the programming instructions. It programmed the first try and works flawlessly! $100 cheaper than the OEM Honda part.

I could not program this to work with my old key fob. One would work but not both. Just called the company Keyless2go and they tell me its defective I would like to return it.Russ

Tried to program to my 2012 Odyssey to no avail. I had to take the guts out of my old keyless entry so it would link to my van. So I paid for a case and still don't have an extra working fob. We also went to the website to make sure we were doing it right for my Van.

Works perfect, Took less than a minute to program on my 2006 Odyssey, Quality of the product is similar to OEM,

Followed the directions. Tried several times. No luck.

I bought two and tried programming it as instructed. I even took it to the Honda dealership to program, even they could not program it. This does not work on Honda Oddy.. do not buy it. I bought it and they charge me ~7$ to return it.

It opened the side panel doors but does not open the hatch or locks.