3.5" INCH (89MM) HILLARYS SLIMLINE VERTICAL BLIND TRACK REPLACEMENT TRUCK/CARRIERS (10 RIGHT HAND RUNNERS)

Quite a fiddle to fit but if you work it out logically then it all goes together very well.

Bought this to replace damaged clips, they are slightly different to the ones I’ve got in size but still fit and work well

Easy to fit and use and good value. Although it arrive 2 days late with no communication from the vendor to let me know or apologise

Good replacement for vertical blinds.

Arrived quickly and were easy to replace the damaged ones

Prior to ordering I would recommend that you check the suitability of these carriers for use in your existing header rail. I have had my Hillarys 3.5” Vertical Blinds since 2009. Unfortunately a couple of the carriers rotating gears now appear to have worn which means that not all of the vertical slats rotate evenly. The original white/plastic carriers in my headrail measure approximately 1.5” in depth (i.e. measuring from front to back) and appear to use wheeled runners while those supplied by uk-blindparts measure 1” in depth and slot into into the headrail. I assume that these replacement parts are intended for a much narrower and possibly more recent headrail than the ones originally fitted in my home.

We ordered these carriers to replace the ones on our 3.5" Hillarys vertical blinds, which were degrading. Take photos and/or notes when disconnecting the old ones. It is fairly straight forward to replace them, but take it slowly. Which is what we did. However, these carriers are actually a millimetre or two too small and do not run on the metal casing above. They will not fall off as the rod goes through them all, but they do not run smoothly, twist about and hang too low. Very disappointed.

Did not come with the 'stop end'. This was not explained in the product info.