TRUGLOTFX Handgun Sight | Durable Shock-Resistant Compact Brightly Glowing Tritium & Fiber-Optic Xtreme Day/Night Sight for Handguns

Already have other TruGlo products, this is the first TFX. Glad now the other sights were discontinued. The fiber optic is amazing in daylight, it captures light and makes the sights pop out. The tritium holds up to TruGlo's reliability as being very visible in low light/dark. These sights were installed on a PT111. The only hitch was the pin that allows the locking mechanism to protrude when activated was too long and the metal TFX sight would have ran into it during installation. Ground about.75 mm off the pin to obtain a flush fit in the slide. Used a VISM Sight tool, ( NcStar VTUPRS, purchased from Amazon), and the sight installed without issue. This sight tool has changed a variety of sights now without marring/scratching the slides. The original plastic sight would have come off with minimal push, had the lock pin not been in the way. As far as any accuracy differences I do not expect a lot out of a two inch barrel autoloader, (I don't count the chamber as barrel). The most important thing is practice with what you have. If looking for hole touching hole accuracy at 15 plus yards, there are plenty of custom manufacturers out there that offer this with longer barrel options. These sights are a bargain for the cost. Hope this helps resolve some of the issues others had with installations. A tip of the hat to the gentleman that managed the install with a mallet. A sight pusher tool is highly recommended for this type installation.

I put these sights on my Taurus PT709 Slim. First off these sights are tough, made with CNC steel they feel solid. And they have nice rounded edges to prevent snagging. This is my CCW and I practiced drawing several times as the front sight post is taller then the OEM post. Never had a snag in over 50 draws. On to install, The front sight post goes on easy, however the rear sight really needs to be pressed into place. I actually used a nylon mallet (AR15 Pin and Hammer kit) and used some gentle persuasion to get the rear sight into place though it took a good 20 minutes of tapping it into place until I had it perfectly in the center of the slid. I had read that hitting it hard could rupture the tritium capsules, so I didn't hit it as hard as I could. Just tapped her in. Now on to shooting. Shot at an indoor range (Still butt cold with the ventilation running) and the sights are dead on. Couldn't be happier with the accuracy. In the pick 7 yards with Federal Premium LE tac/bonded ammo. The first 8rds was slow and steady made sure I wasn't getting sloppy on my mechanics. Then the next mag I just let em fly and you can see the lower left grouping. On to sight picture. I use tritium night sights on my duty weapon, and these sights are just as bright and give just as good a sight picture as those at work. Easy to align and get on target quickly.All in all I really like these sights.

I wanted replacement sights for the crappy plastic ones that came on my Walther PDP (I thought only Glock put on cheap plastic crappy sights...), and was pleased to find out that any sights that fit the Glock 19 would fit the PDP. I have TruGlo sights on ALL my pistols so I knew what I was getting, but these were my first Tritium AND fiber-optic all-in-one sights, and I can tell you I am even more impressed than I thought I would be!The Tritium is perfectly bright at night, and by day or indoors in the light, the fiber optics pick up light and make them sights glow nich and bright, so they are great for low light/no light as well as bright light! In fact, in the sun, they are so bright you don't have ANY problem seeing the sight picture! I'm not an 'optics' (red dot) guy, I don't believe in all that garbage for a self-defense weapon, I train and get used to standard, or 'iron' sights, and maintain my proficiency without relying on toys mounted to my pistol.Like I said, I got this model for my Walther PDP as they fit the Glock 19, so if you use THIS set, you will need the Glock front sight tool (you can get that here on Amazon), and a rear-sight press, also from Amazon, both for what it would cost you to pay a gunsmith to do it for you. It takes about ten minutes from start to finish with the correct tools I mentioned above. Please note, do NOT use the red Loctite when installing the screw on the front sight, use the BLUE Loctite, and also USE THE SMALLER SCREW that comes in the package for these sights if installing on a Glock AND for installing on the PDP if that's what you are putting them on...I used the original screw that came on my PDP but the front sight was loose as the PDP screw was too long.I have put about 400 rounds through the PDP so far and the sights are still tight and working as they should. Highly recommend TruGlo...they are as good as the other brands but cost less than most.

Très bien fait, juste un peux de fitting à faire. Super en pleine noirceur.

This sights are well built and work great in all lighting conditions. The fibers are very bright during the day and the trillium kicks in when it is dark. The notch is square but is wide enough for quick target acquisitions. I like my Glock again...(just make sure you don't use a punch to install these sights but use a sight pusher instead)

very nice, great price

Installed on my Glock 17, nice and bright day and night.

Different sights arrived than what i ordered, the front sight was fiber optic only, not tritium and the rear sight was not the TFX model it was the older TFO. Have a look at my pics.I guess that explains the substantially lower price, buyer beware.