MIKKUPPAABS Sensor, Front ABS Wheel Speed Sensor Replacement for 2002-2009 Chevy Trailblazer, GMC Envoy, 2002-2004 Oldsmobile Bravada, 2005-2009 Saab 9-7x 15158254

Kind of hesitant ordering this due to the fact that auto parts stores sell these for $80 a piece and these were a fraction of. So glad I did. Worked great, fixed the problem.

Great quality and great fit. Routed exactly like stock, with all the correct grommets to mount it in place. Sensor fit snugly in the hole and the connector mated rate up. I would recommend these for a cheap alternative to the $80+ each OEM sensors.I bought these because I was having random ABS activation under braking on dry roads, but no lights on my dash. I suspected it might be an ABS sensor because I had replaced one before to fix similar issues. I bought a set of these and planned on doing one at a time until the problem fixed itself or I replaced all 4 and could move on to something else. I started at the one I previously replaced (used a cheap eBay sensor last time) and luckily it corrected my problem right away! No trouble installing or with fitment. I would buy these again.

My nissan frontier 2010 wasn't showing abs light or any code but the braking felt like the abs was kicking in when stopping. At first it occasionally a little pumping feel in the brake pedal but then started every time I pushed the the brakes. I tried disconnecting abs sensor on the passengers side and abs, slip and vdc light all came on. I drove it and the pulsing went away. Not know which senor I ordered the front first senors and replaced the passengers side and that fixed the problem. A good guess but the job isn't to hard you need to remove the brakes, caliber rotor and caliber bracket. The sensor will probably break taking it out of the wheel hub. It broke on me and is a mess to get out. I drilled it as much as possible and pulled it out with needle nose pliers. So hope this helps. Good luck.

The product worked very well and it fit just fine

Good value for money and easy to install

The traction control was intermittently engaging for a second on dry pavement when starting out. Also was getting ABS and service traction control. The 2 most likely causes are a bad speed sensor on the wheel bearing or this wiring harness. Since the wheel bearings had been replaced a few months ago I threw the dice and ordered this harness. It took all of 20 minutes to install, so simple a cave man could do it! Problem solved. The driver side is subject to corrosion from dirt/salt/rain and usually will fail after 100k miles.

Just like OEM

These dis not fit my 2010 Nissan Altima. Used these because one was damaged replacing wheel bearings. After install and clearing all codes, ABS system still did not function properly. The ABS, SLIP AND VDC lights still came on and ABS would kick in on dry roads. After several attempts to fix the problem and several scans and clearing codes, I ordered another set of sensors (paid a lot more for them too, because they weren't after market). As soon as I put them in, I could tell immediately that the fit was much better. These garbage after market sensors were not quite as long and had a little play in them before tightening them up. The new ones worked great and fixed the problem. Better off spending a little more and saving time and stress trying to figure out what the problem really is.

same has original but can be hard to instal if you have rust in the hole of the sensor, just grind the hole behind the wheel. Sensor are perfect size

Very cheap alternative to oem...be warned they are not fun to remove, but a punch and hammer get the job done.

Bought because one of mine failed on jetta mk4, fit tight shaved a little off it for snug fit. This product is same price as 1 wheel speed sensor other places and in this one you get 4

Merci très satisfait.

I bought these for my buddy's car and no complaints. Fits perfect