Precision Square Ruler for Measuring and Marking - Aluminum Steel Framing Tool for Professional Carpentry Use (4 Inch)

Used it for small projects I have and they are true square. Better than my all my carpenters square.

I've had a home woodshop for a couple of years now, and have done a reasonably good job with most of the items I've tackled to build..... but really none to perfection! Actually, I don't think I really ever understood what perfection in a woodshop really needed to advance to that level. I've used reasonably good, name-brand tools, but it turns out that everything I owned was always 'off' just a tiny bit, when it came to 'square', 'level', or 'straight!' Well, enter my new Woodraphic Layout and Measuring Tool, or as I call it, a SQUARE! I chose the 8" Model and it was very pricey by my former standards, but all the reviews were top notch, SO striving to continue to educate and improve, I purchased one. I've NEVER seen a tool so precise!!! It's made in Korea, and of the very highest standards I've ever seen! I included a picture of a Table Saw Sled I built from scratch last week, and you probably can't tell by looking, but EVERY SINGLE possible ANGLE is perfectly square! It's amazing, and I'm so proud to finally be able to say that I've produced something that woodworking-wise.....is almost perfect! You're just never too old to learn....and improve, by simply finding the right tools (help)! It does come with a Pentel 0.5mm mechanical pencil for scribing, and can assist you with a lot of other functions (most of which I've not even tried yet). I do very highly recommend this product for you and your Shop! Best of Luck! Jim Benson :-)

This is for sure a very expensive one but if you're a dedicated wood worker then this is an amazing and must have tool for your workshop. It's very highly durable, the amount of holes for various different measurements is the biggest selling point. This is the most functional and most accurate squaring tool on the market. The packaging is top notch. It feels like you bought a new tech device when you open the package and the foam contains the squaring tool with a mechanical pencil so professionally packaged. The size is the best part, no project is too small or too large for this one. I choose the largest size because I wanted to only need to buy one of these every and I'll tell you now it's the last one I will buy because the quality of it will never fail me. Do not fall for buying a cheaper alternative option on this spend the money it's worth the accuracy.

Anyone can hammer some pieces of wood together and make a thing.... But after a few things, you start to think that maybe, just maybe it would be better if other things placed on top of those first things didn't slide off the edge because the top sits 10 degrees out of square. If your things slope in undesirable ways, now is the time to get a precision square. Sure you can pick up one of those cheap triangles at the budget tool store, I did. Then I found that it wasn't as square as I first thought and my things still sloped. So invest in an accurate 90 degrees. Use it to check all your previous squares and then your table saw blade and table saw fence and your miter gauge and then your miter saw etc. etc. You'll be amazed at the difference it will make to your things... It is accurate, functional, and sturdy.

Sq as any woodpecker. I'd recommend

This is a fine product. It is perfectly square, it is pretty well, anodized, and it is functionally great. It has little holes so that you can scribe straight lines on the body of the square. However, I am returning it because I am not impressed with the value for the money. at $80 or $90 or whatever it’s at, I would rather much pay $30-$40 more for a woodpecker’s square. This square is great, but the machining compared to the woodpecker’s square is not as great. And anodizing is also not as high-quality as the WoodPeckers unit. If I were to use the woodPeckers square as a standard, I would say that this square should be priced around $40. The wood Peckers square is much heftier, it is thicker, it comes with a case, its anodizing is much nicer and smoother, and it’s machining is much nicer and smoother. Functionally, this unit is fine, but it feels so good to have a really high-quality tool to use. It is inspiring, in fact to have a high-quality tool, because mentally, it raises your standard for your own work.

Passes the square test (draw a line with it, flip it over and see how it matches the line when approaching from the other side). Has helped my conversion to metric for my woodworking. I really like the little pencil holes for layout. Ridge to brace against your work piece is of decent size without being excessive. Easy to recommend.

Very nice square at a good price. I was looking for a good square that that didn’t say woodpecker and break the bank, this is the one. Very good square and offers everything the red ones do at a fraction of the cost. Would buy again.

After realizing none of my current squares were not meeting their basic function (square) I started searching for what was out there. A Woodpeckers square was out of the question it would take six months to arrive and adds up to three times the cost once all shipping and dollar conversion has taken place. I came across this product by chance the main draw card for me is the shoulder on the main stock that allows the square to rest on the work piece (same as Woodpeckers) Theres not much information out there but what I could find was enough to make the purchase. The square arrive pretty quickly. At first I thought the square was off I did a number of test and came back with the same result it was only after I got a Drill pro square from banggood I realized my test surface was off. once I swapped out my test surface I found the square was perfect. I would recommend this square based off my current findings. If I can I'll report back after some decent use.

Commandée pour mes projets de menuiseries. Je possédais plusieurs équerres mais la plupart n’étaient pas d’équerre… ce qui est dommage pour une équerre. J’avais donc déjà commandé une équerre à chapeau respectant la norme DIN875/1, de 300mm et donc d’une tolérance d’écart de 25 micromètres. Elle est effectivement très précise mais peu pratique dans le cadre du travail du bois étant donné qu’elle ne possède aucune graduation, que le chameau est peu adapté aux pièces de bois et il surtout qu’elle est très lourde. Il me fallait donc une équerre de précision équivalente mais davantage adapté à la menuiserie. Cette équerre Woodraphic est parfaite pour cela. Elle est extrêmement precise, j’ai pu le vérifier par la technique du retournement et de la bissectrice. Elle possède des graduations gravées, en millimètres. Un talon très bien équilibré et parfaitement plan, qui recouvre la base de l’équerre et permet de la caler à la fois sur l’axe vertical mais aussi horizontal. Des trous parfaitement justes à chaque millimètres pour tracer à l’aide d’un porte-mine 0,5mm. La lame en aluminium a une épaisseur de 2mm, donc très rigide. Et en plus j’adore la couleur !! Elle est cher c’est vrai mais pour ce prix vous serrez 100% certain d’avoir une équerre à 90 degrés juste, un instrument de référence. J’ai des équerres stanley, facom, starett… parfois elles sont juste, parfois pas tout à fait, parfois pas du tout et dans ce jeu de loterie j’ai du investir plus d’argent que dans cette équerre Woodraphic.

Too small need glasses . Not value for money

Square is good. Nice to use. Well built.

Leider viel zu spät habe ich hier zugeschlagen. Nach unzähligen Enttäuschungen mit Hedue, Sola, Vogel und Fernost Marken habe ich mich überwunden und das Geld für den Woodraphic Winkel ausgegeben (und davor schon mehr für schlechte Ware verschwendet). Der Winkel sitzt. Er hat sicher keine 90,000 Grad aber nahe dran. Ich habe den Umschlagtest extra mit einem Anreißmesser gemacht damit ich eine feine Linie habe. Keine Abweichung zu erkennen mit dem Auge. Das Arbeiten damit ist eine Freude. Gut ablesbare Zahlen und genaue Maße. Endlich muss ich mir keine Gedanken mehr machen ob der Winkel passt. Ich werde vermutlich auch noch den kleinen irgendwann kaufen.