1000Mbps Gigabit Ethernet Converged Network Adapter (NIC) with Intel I350 Chip | Ethernet PCI Express NIC Network Card | Quad Copper RJ45 Ports | PCI Express 2.1 X4 | Compare to Intel I350-T4

Worked as described. I loved that it was supplied with two brackets to adjust to case size.

This is my 2nd or 3rd purchase of a 10Gtek product. I've previously gotten some SFP's and Optical Cable from them. Everything has performed excellently without any issues. This NIC is going into a server for our Vyatta POC and I'm sure it'll work just as well as the SFP's have. I would highly recommend them and would buy from them again. Great products at great prices!!

Good product, would recommend. Using it on a Proxmox server.

Card is not compatible with brand new Dell Pro Max Tower T2 Desktop, causing original PCIe Gen4, M2 SSDs not to be able identified by BIOS. SSDs are just disappearing from the system if network card is installed. Motherboard replacement did not help.

I have a 4 port HP NIC based on the Intel 82571EB chip that worked great in ESXI 5.5~6.0, but in ESXI 6.7 I was having disconnect issues that appeared related to hardware offload. I had to turn hardware offload OFF. Being I also had some onboard NICs with newer chips (including 2 10gig copper) I didn't want to go that route. So bought this card hoping it would stop the continuous errors in the vmkernel log and sure enough it did and the host is now very stable and I can keep hardware offload ON. Those older HP server pulls have always been solid performers but I guess not with ESXI 6.7.

Recognized in ESXi 6.5. Came with standard and low profile bracket along with a driver disk. I bought this card because it appeared to be shorter than the older Intel PT or HP cards, which might not fit in the slot I needed it in. Was a perfect fit in my SuperMicro server. It's also PCIe 2.0 instead of 1.0 or 1.0a. A bit more expensive than the older cards but met my needs perfectly.

I am using this card in a new ESXi 7.0 host. I had zero issues with it being recognized and it's performing great. I also recommend this as a solution for the pfSense users out there. I ended up going with an already available i340-t1 but this would have been an easy choice in that instance too otherwise.

No weird installation or driver issues. Plugged it in - my computer booted - installed driver - setup team and was ready to go. Getting all expected results and speed. Took 10 minutes. Cant believe I wasted so much time with StarTech on their inferior Intel i350 Chipset PCI Card/ product that wouldn't even allow my PC to boot when plugged in. Save yourself not only your time but your money and buy this instead!

Equipamento compativel com o HP 600 G5 SFF Sistema do OPNSense detectou sem problemas o cartão de rede.

I'm using this NIC in a small form factor x86-64 Linux Mint desktop computer. It installed with absolutely no fuss, nor any need for drivers. The card came with a full-height slot bracket installed, but the included smaller bracket installed with a single screw. I'd gladly buy from 10GTek again.

I purchased this for use with my new gigabit installation at my house. Slapped it into my pfsense box and I'm getting a very nice 950mbps down and 95mbps up WAN>LAN with no problems and noticable increase in CPU usage as a result of the NIC. Very nice. +1 for the inclusion of a low profile bracket.

Perfekt um einen VirtualisierungsHost für weitere virtuelle Server zu erweitern. Auch für SET als Nachfolger von Nic-Teaming funktional.

Bon debit mais chauffe beaucoup, prevoir une bonne ventilation de boitier