Unlock Convenience! 🔓 Your key to hassle-free entry.
The Keyless2Go Replacement Key Fob is a self-programming solution for lost or broken car keys, compatible with select Ford, Lincoln, and Mercury vehicles. Each fob is pre-tested for quality and functionality, ensuring a reliable replacement that comes with easy DIY programming instructions and video support.
| Manufacturer | Keyless2Go |
| Brand | Keyless2Go |
| Item Weight | 0.352 ounces |
| Product Dimensions | 1 x 0.5 x 3 inches |
| Item model number | R-FD-3.go--X2 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | R-FD-3.go--X2 |
S**E
Works perfectly
Works great for my 2000 ford explorer and the buttons all work fine even from a distance. It behaves just like the original before it stopped working. The only difference is that it feels a tad bit lighter than the original. It doesn't feel like I'd break it by squeezing too hard, but it's likely still less durable. That said, for the price I couldn't care less about durability since you can by 10 of these for the cost of just 1 from Ford and a replacement shell is even cheaper.Install was super easy, I just moved the key back and forth quickly until the locks made a noise (didn't even count), pushed a button on each fob then turning the key to off. Done in <15 seconds. ^_^How to install:- Car should be off.- The key turning is between off and on enough to turn on the dash. It's in the same direction that you start the engine, but you do NOT start the engine. Just toggling it back and forth.- The key turning doesn't have to be fast (8 times in 10 seconds), so no need to strain yourself flipping it as fast as you can.- You'll end up stopping at the on position when the locks make a noise to indicate it's ready to pair with your fob(s) at which point you have 20 seconds to press any 1 button on each fob.- Finally turn the key to off and the locks will make another noise indicating it exited fob mode.
I**N
Fantastic gadget/ Fantastic price!
I had actually gotten one similar before so knew what to expect, but I think this one was much less money, so I got two. My last one, I had lost. They are so easy to set up (I went on line for the instructions). It takes only a few minutes to set them to your car. I think the Car Dealers charge $100 to $200 (or more). These were $8.00 each and work GREAT! Fantastic deal!
C**O
It works perfectly fine
It dos exactly what it says 👍🏼 easy to program in first try works perfect👌🏼 really happy whit this buy👌🏼👌🏼
G**O
It works and it is easy to set to work with the car.
It is a good size. It works well. It has a short range. It is less than 30 feet, but I am not sure how much. To connect with the car, (with all the doors closed) just insert the car key, turn it fast, and back from the off position to the electric position repeatedly within 10 seconds until the locks open and close. It didn't work the first couple of times, but it worked the third time. So, if it fails, do it again. I am not sure what I did differently the third time.The picture shows the size of the FOB. I showed it with the mouse and next to the keyboard to give a size reference.
D**.
Worked for 2006 Mazda Tribute-but SHUT the DOOR 1st*
I ordered this for a 2006 Mazda tribute.*At first I couldn’t get it to program following the company’s QR programming link and entering my make, model etc. i followed all steps and tried Robby 10x and it did NOT work. I googled found a video of a guy doing in on a 2001 ford(completely diff car but he said shut the door)The key is to SHUT THE DOOR & then push unlock button on the door , turn the key back n forth 8 times keeping it in “on” position on the 8th time and then I heard the locks enter program mode. Click a button on the fob, and then you will hear locks make a noise again. Turn it off take key out and test it! You should be good to go!Again SHUT DOOR regardless of what programming instructions say! Then push unlock button on your door!👍🏼
D**L
Easy set up
My husband breaks or loses these so the price is great and it sets up easy
M**4
perfect
no issues working great comes with battery. install on my 2001 ford ranger was super easy. turn key front to back eight times ending on ignition on and you'll hear the locks go. then press any button on the replacement key fob. locks should go again. then turn key off and remove. locks will go final time. it should then be programmed.
D**K
Works as expected. Good video
A card with a link to a vehicle specific video on how to program the remote was included with my order. The video very plainly showed how to program the remote. Everything is working exactly as expected. Units came with batteries. Very easy to get up and running.
M**E
Worked Great
Worked perfectly and was easy to program to my 08 Escape
A**R
Works very well, quite easy to set up.
I was a bit skeptical if these would work or not but I had both remotes in the truck for programming and worked very well. Follow the instructions for the vehicle you have and you have 2 extra remotes. Came with batteries and ready to go, we will see how long they work but I am very happy with the product.
M**K
great
work perfect
R**K
FITS AND WORKS GREAT
WORKS PERFECT, PRETTY EASY TO PROGRAM, GOOD DEAL !!!
F**R
A great solution at a great price if you lose your key fob! Easy to program too!
These fobs are a great solution at a great price if you lose your key fob! Easy to program too! I highly recommend this product.
Trustpilot
2 months ago
3 days ago