Electric French Fry Cutter, Sopito Commercial Grade Potato Cutter with 1/2-Inch Blade Stainless Steel Perfect for Potatoes Carrots Cucumbers

We loved it. Grandchildren made loads of French fries using this machine and air fryer. Very clear how to use etc. good quality

I love this 1/2" cutter. i think the 3/8 blade would be too small for most things. I did a lot of research before i bought this electric one. i have bad hands so anything that can make my life easier, i think is worth the cost. most people said when cutting sweet potato you need to nuke 3 minutes, however i only did 1-2 minute (depends of size of potato) and it worked great. (you do need to nuke because the machine will struggle and maybe break). it is a breeze on regular potatoes (no need to nuke them). i cut up a 10 lb bag of white potato in like 5 minutes. it took more time separating the fries by size and vacuum seal into meal size bags. (There is only two of us) i did not have any waste, the smaller side and end pieces got cut up for hash. depending if you don't care how small your potato pieces are for potato salad, i first run the potato in the slicer once and then i cut that potato in half when it comes out of machine and then put it back in machine sideways and run it again. that way the potato is cubed small. sometimes i still have to cut smaller for my potato lumpia, but it saves me time starting with small cubes. i also cut up zucchini for baked breaded zucchini sticks, so good. cleaning is a little bit of a pain because you have four screws and washers (12 little pieces, so easy to drop in the sink) on the front of blade to take off before you can get the blade off to clean. but after that its easy. you just hang the machine over the sink to spray the pusher off (use a toothbrush for the crevices) the blade was also easy, just be careful. DO NOT let things dry on the blade, i can see where it would be really hard to clean then.

I read some reviews on some other potato cutting machines and was not too impressed, but also realized that there were not a lot of really good videos on the products being sold so I decided to make one for this product. Most of the parts seem pretty decent enough, but the cast metal cutting plates were a bit of a letdown (I thought they would be solid steel), but at least they’re not plastic. The machine is pretty easy to disassemble for cleaning, but some parts may not be as easy to clean mostly because they’re not removable like the mechanical push plate mechanism. The push plate part that touches the potato is removable and cleanable, but the plate that’s behind it is part of the machine and if potato got in there, it would be a little hard to clean out. I wouldn’t recommend putting any parts in the dishwasher at all. There’s no Hall effect sensors, or any protection against smashing/cutting your fingers off in this thing so I wouldn’t recommend letting young children operate this machine at all. Honestly, I think some adults should not even use this machine LOL, so if you’re one of those accident prone people this is not the device for you. My best recommendation would be put one hand in your pocket at all times, use the other hand to put a potato in the machine close the door and then use that same one hand to operate the controls. Never put more than one hand near this thing when it’s in operation and or plugged in. The machine seems solid given its plastic construction, but it’s not too heavy for someone to easily move from one part of the kitchen to the other. Let’s just say it’s a lot harder to move a Cuisinart or Sunbeam mixer than this machine but it is still a lot heavier than a toaster. I don’t quite know how well it would cut potatoes, but I didn’t see another video review showing potatoes being cut so I don’t think that’s going to be an issue. If there is an issue with cutting potatoes, I will update this review. Given from what I know now I would buy this unit again just from the fact that it has a Usted power supply and construction is pretty sturdy and the motor seems pretty strong, let’s just say that I was unable to stop it with my hand for a brief moment just to see how strong it was (with the cut plate removed, of course ) and it doesn’t seem like anything‘s gonna stop that motor, the motor didn’t even sound like it was being bogged down no matter how hard I pushed back on it so that motor is really strong, like hydraulic press, strong! I have a handpress unit that does the same thing but it is made out of plastic and I think I’m gonna break the thing when potatoes don’t go through easily. Plus, I’m getting a lot older now and it’s getting harder to push those darn potatoes 🤨 I do not think that will be a problem with this machine any more.

Used this for the first time last night. It is AWESOME. It slices the potatoes with ease and FAST. The only issue I have is the size but it really needs to be big. I just have a small countertop. Still worth it if you like fresh cut fries! I am hoping to find other slicing blades for this.

Great for dicing vegetables. It's big and clunky but gets the job done better than any food processor.

This electric fry cutter is amazing! It sliced through a jumbo russet potato without a hitch. I started with the 1/2" and 3/8" dies, but after seeing how well it worked, I went right back to Amazon and ordered the 1/4" one too. Definitely worth it if you make fries!

Bought this as a birthday gift for my sister and she absolutely loves it. Easy to use.

AMAZON IS AMAZING..... & SO IS THIS PRODUCT..... This works perfectly. The plastic is removable and easy to clean it is high quality plastic and so it the whole unit. It is a durable strong cutter. It will actually cut sweet potatoes. Blades are two different sizes..

This excellent electric potato cutter works wonders!! I am sad to say my counterspace cannot accommodate it. Emailed Seller and promptly responded and provided me with an excellent offer which I could not refuse ad hopefully he will keep his promise. This machine is a monster eating machine, cuts through like butter on russet, hard potatoes like sweet potatoes with ease. No more pushing down on manual machines, fries getting stuck or broken blades. Easy to clean - just a few butterfly nuts and a few "o" rings. If you have broken many cheaper versions the cost of those machines could easily add up to the cost of this machine. Mind you, it is expensive but honestly, its well worth the money in the long run. Very happy with machine and it's extremely fast!!

Funciona de maravilla

I am very pleased with this product it is extremely smooth to use and makes cutting fries a breeze. Some purchasers claimed it was difficult/time consuming to clean. I found if you just rinse the dirty ends under the spray nozzle, you do not need to take it apart each time to clean it. Great product.

Had a manual one before which was a pain to use. This makes fries much easier. I removed the stainless steel plates and the plexiglass plate. these are for safety of course but for me easier to use and less parts to clean. well built and easy to operate. love it.

Great product so far. Make sure it has the attachment you want e.g. thick steak fries cutter. Also if you're doing sweet potato fries, make sure it is straight as it's cut. If it is lying at an angle, it eill be pushhed against the side wall and bend it because it's harder than a yellow one. If the potato is too big to fit straight, just cut it in half.